Toggle Fridge Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.20 net (excluding VAT)
For file: FridgeMagnet_02-Body_0.4n_0.2mm_PLA_MINI_15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.18 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 14.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix from Zel's Refrigerator Note Toggle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This small fridge magnet is a remix from Zel's Refrigerator Note Toggle. It is not really a toggle because there is only one magnet in it. The wings are uneven and the smaller one is used to release the magnet easily.
The magnet used is 10x10x1 mm.
You might want to use brim since the toggle is printed on its side, which is pretty narrow.