1 / 4
510 spacers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spacer is 20mm by 0.6mm, to be used with a Cana Modz spacer. I'm limited to .6mm because of layer height.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This spacer is 20mm by 0.6mm, to be used with a Cana Modz spacer. I'm limited to .6mm because of layer height on my printer, however, I could probably get away with .5mm.
Center cut is 6.8mm to fit the 510 threaded atomizer.
Center cut on the full 510 file, is 9.2mm, to fit the entire 510 socket connector through the spacer.
Instructions
Used FreeCAD, made some very basic cuts.
Category: Hobby