Counting matching models…
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
See the repository on Github Customizable, 3d-printable model for a 510 cartridge holder. Holds 3x 510-style cartridges vertically. Assumes 45mm long carts with Ø 11mm, or edit the OpenSCAD source to customize.
Purpose I often find myself going on short trips where I try to pack only what is necessary, and my trusty OneBlade QP6510 is always by my side. Consequently, I had to figure out a design to protect it from the harsh conditions of these…
peli 1510 to 608 bearig adapter ali pu wheels.stl - for narrow PU wheels from aliexpress (0.75 wider spacer, instead pelican wheels) peli 1510 to 608 bearig adapter.stl - for regular pelican wheels
A custom 3D-printable connector that lets you mount your Decathlon SL510 clip-on bike light directly to your seat post. Designed for a standard 31.6 mm seat post, angled at approximately 75° , this adapter provides a secure fit (see note)…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
peut se mettre pour la grille gauche ou droite imprimer en ASA ou ABS si vous voulez la boule : https://cults3d.com/fr/mod%C3%A8le-3d/gadget/renault-scenic-3-b-pillar-vent-adjustment-knob-734510001r
I was wanting to have a good place to store my Amprobe AM-510 multimeter. None of the premade Rugged Box Parametric files fit. So this is my first attempt using Fusion360. Credit to another box comment for the pocket having no walls (top…
Edit 1/30/26- thickened plate and added an extra hole to allow the bolt to countersink Will fit standard crazy cart using stock controller mounting holes and one side hole from the plastic covers Reuses the original mounting screws for…
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
this is for easy use of tweaker wires.
I received an old Asus laptop that broke at the hinges as the piece sheared off but the wiring was still connected. It was a perfectly functioning laptop but the hinge just couldn't move without risk of further damage. I constructed a…
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
Easy print travel case for a loaded Yocan Kodo & Kodo Pro vape battery and cartridge
Keep your FTM‑510 safe and accessible with this sturdy shelf mount. Designed for easy installation and a clean setup, it’s the perfect solution for organizing your radio station.
ORGANIZER GT510 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Total Protection. Anywhere. Everywhere. Stop letting your premium atomizers get scratched in your pockets or collect dust on your shelf. This 2-in-1 Protective Case and Display Stand is the definitive solution for vapers who value their…
2510 fans can mount to 3010 locations In many cases high performance 2510 fans can create higher static pressure than cheap 3010 fans (e.g. Delta ASB02505SHA-AY6B @15k, West3D Berserker @20k). Hardware: 4x M3x6mm: mounts 2510 through back…
M3B Plus vaping battery holder an opening 14mm wide by 30mm deep
About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…
Printable mount designed to hold the DeWalt DCF510 20v Brushless ratchet when paired with the 2AH battery
tight tolerances, make sure your printer is properly calibrated, 0.2mm layer height friction fit for ESP32S3 and PCM5102, box clips together both usb ports and 3.5mm audio jack exposed
Description I'm happy to present my new keychain project. Front of Radmor amplifiers as keychain. First up, two classic models. RADMOR 5411 RADMOR 5102 Print settings For better print quality I strongly recommend 0.25mm nozzle. For 0.4mm…
Quick and easy adapter solution. Since the mount is quite small, use a tough filament for printing (ABS, PC, or similar). Also, make sure your printer is properly calibrated for accurate scaling. If the filter doesn’t screw in smoothly,…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
3D model description Atomizer driptip with 510 connection diameter. You can also look at other driptips from our workshop, for example in the shape of circular and hexagonal driptips 810. Used sealing rubbers with an outer diameter of 7…
No hardware cover for the BE5100 and BE6500 access points by Zyxel. It is held in place with pins that extend into the screw recesses I printed mine in PLA with the top PIN SIDE on the plate and internal organic supports. The cutout is to…
Titel KS Tools 911.4510 EVOLUTION 1/2" Bit-Stecknuss-Satz (30-tlg) – CAD Modell (STEP) Beschreibung Ich habe den Bit-Stecknuss-Satz KS Tools 911.4510 EVOLUTION Series (1/2", 30-teilig) vollständig im CAD rekonstruiert und stelle die…
Repair for Anker Wireless Charger, PowerWave 7.5 Car Charger with Air Vent Phone Holder. Mount has been discontinued. Old screw and rubber insert can be used. I recommend CF Nylon but I printed with PETG. Be sure to print insert with TPU.…
La couronne d’entraînement est l’élément central du système de traction arrière de la tondeuse. Elle permet de transformer l'énergie rotative de l'axe de transmission en mouvement linéaire pour faire avancer la machine sans effort manuel.…
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
Hoy os dejo una reparación de unos cascos bluetooth JBL TUNE 510BT de mi hija. Para arreglarlos hay que desoldar algunos cables como comento en el video.
Remix of Original File by Tmarentette . None of the other models available fit my setup the way I wanted, so I remixed my own (with some emphasis on retaining STL quality). V2 (best) Slightly looser fit then V1 but allows for 1 handed…
Print without supports ideally for a smaller layer height (for example 0.15mm). You can use rubber bands from an old atomizer or another 510 drip tip.
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
Little box to hold up to 8, 510 cartridges, with Magnetic Lid using 6mm x 2mm Magnets found on amazon for less than $10 for a bunch.
Decided to make a simple wall mount in OnShape for an old Millenium Falcon lego set I've had collecting dust for years on a shelf. Lego Set 75105 This was intended to be a rough draft but it worked well enough that I didn't bother making…
This is a holder for mounting the Sony WF-C510 on your Ikea Skadis. Print it with auto tree supports , remove the supports, place it on your Skadis and put the headphones in it. I also suggest using at least 10% infill . It's designed so…
Dell AX510 Stereo Soundbar Speaker Holder and Power Connector for Incompatible Monitor is a custom solution designed to adapt the Dell AX510 soundbar to monitors that are not natively compatible with its standard mounting or power…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
Gaze not too long into the void, for you will inevitably think to yourself: “Man…I could fit another couple terabytes in there.” To remove the NZXT's front frame, you may have to use a pair of needlenose pliers to flatten the tabs on the…
An easy to print case label for 1510 Pelican cases, It has a sketch ready to be modified with 2 lines of text. If you don't have access to fusion message me and I can create a .3mf for you with the text you require. If wishing to do dual…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. I went mad and bought this torque screwdriver - primarily for…
My dometic 510 toilet refused to be repaired - even after replacing the ball valve, shaft, spring cartridge etc numerous times. Either I was missing something or it was just too worn. Anywho, this model fits over the square shaft and lets…
Originally meant to put aside 24mm diameter atomizers with standard 510 thread.
I installed 2 U.2 disks to my tower PC case, which do not have very proper HDD cooling for the 2.5" mounts. So I added this fan duct to the disks. As my PC case is designed to fit 2x2.5" or 1x3.5" at the same location, I designed this…
Found this great tray and since I had the Zeus Ion battery, I wanted a slot and this was a great tray to remix, so thank you Skeeter00. I used PLA + 0.2 Layer Height 2 Walls, 15% Infill, No Brim, Textured Plate Gyroid pattern, No ironing,…
This project involved redesign of a coworker's original hanger prototype to accept Leviton 5100-IPS power strips. These were also designed to mount on a 1" thick desktop surface with enough room for thick dual-stick tape (Gorilla tape or…
The original cover didn't fit on my W510, I don't know if there are multiple styles of the HDD door, but I modified this one with a few simple cuts so that it fits on mine. Category: Computer
This microphone (Redragon Zeus H510) usually fails at the junction with the audio jack due to material fatigue. With this gadget you lose flexibility. It fits quite tight so you won't need glue. but it can leave marks on the soft surface…
Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…
Remix of a NZXT 510 Case for Raspberry Pi 3 Model B. Changes only to the outside part. I printed mine in PETG but PLA is probably fine too. Use brim. Optional rubber feet, print in TPU. Currently working on a fully own NZXT 510 case for…
Reolink_RLC-510WA Wandhalter erlaubt die Montage an schmalen Balken. gedruckt mit ASA.
Wall mount for the Zyxel WAX510D Wireless Access Point, with catch. Printed in Bambu Lab PA12 GF
přidána verze c s rozšířenou mezerou a přesunutou drážkou pro snazší nasazení náušníků verze C má drážku oteřenou a tisknul jsem na 45° s podpěrami dobře pasují například tyto: https://www.aliexpress.com/item/1005001814013672.html vadily…
This allows me to use some random suction cups I had on hand to stick the wireless sensors to the inside of a reptile enclosure. I doubt this will be a direct fit for many suction cups due to the wide variation of suction cup ends, but…
Got this case with a missing cover for the 5.25" bay. Thankfully had one original cover that used as reference. This is identical to HP Spare 166775-004. You'll find 2 models, one with the full height on the entire piece, another with…
Maybe I am just a heavy handed person... but I have broken both of the syringe plungers with my 510 Pyro development kit. Unfortunately none of my other synringes fit into the provided kit so I wanted to provide a replacement. Wanted to…
Introduction I love my MiniDisc player, but unfortunately, I am spoiled by wireless headsets! I decided to remix a cradle for my Sony MZ-NF610 and turn it into a case that holds some commercial-off-the-shelf parts to add Bluetooth…
Inspired by model https://www.printables.com/model/815063-ender-3-v3-ke-2510-to-3010-fan-adapter I designed a new model that secures the heatsink using four M2 screws, ensuring a stronger bond. Additionally, I included 4mm holes…
This part will let you replace the magnets on the back of the ID-5100's display with a 1 inch ball that works with ball and socket systems such as Ram Mounts B size arms.
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
i cant find any good looking small case for volumio player so i made one Inside there is space for raspberry pi zero, any model should work, in my case i use 2 w and PCM5102 (yellow from aliexpress) Two half holds without screws and it's…
This tool matches the size of Uponor Valves 1005103 and 1046632
3pin connector for example for PC fan if you missing wall after slicing, set wall generator to “Arachne” tested in PC motherboard and fan adapter printed on bambu A1, 0.16mm High Quality profile, generic pla profile. Elegoo PLA filament
Another reference modal. Feel free to print it for prototyping or whatever you need it for! If you're wondering, this is what I modeled it for: https://dpow.net/3d.html
I often stream video of my CupCake in action (especially when I'm printing objects for friends) and wanted a way to mount the webcam so it followed the action. I came up with this very simple design in OpenSCAD. It needs some adjusting as…
As I was building my fake Rivendell bike, I needed to move the chainring a bit more towards the center of the bike frame to decrease potential crosschaining when using the largest cog on the rear cassette. I crated this spacer that…
Stand for the Philips Norelco 5100 trimmer, available here: http://a.co/3OZYDEN It doesn't come with a stand or have one available. I attempted to incorporate the charging cable into this stand, thus the added height and hole in the…
The piece on which the glass platter is screwed broke. After failed attempts of gluing it back together with superglue I designed this replacement part. To install it, you must unscrew all the bolts under the scale, 4 are hidden under the…
DIN Rail Carrier mount plate for the FLIPSKY 75100 V1 VESC. Slide the FLIPSKY into the slot on the back size and secure the other side with a single M4 screw.
I have lost a cover for a Scorpion EXO-510 Air helmet ventilation holes. With OpenScan Mini, I have created these replacements. To get a nice surface finish, I have printed it in the orientation of the STL file with a layer height of 0.08…
This is an adapter for an extraction system for connection to a Felder BS510 band saw. I assume that the other Felder band saws have the same dimensions. The suction hose must have an inner diameter of 100mm. My version is particularly…
This model is compatible with the lego system.
Vertical stand for Fritzbox 7510. Use supports for overhanging structures, print with any material.
DeWalt DCF510 drive adapter holster Printed in PLA with 5 walls and 100% infill. Never mind the layer lines, I used an old printer that needs maintenance.
This is a simple low profile bracket for a PNY Nvidia NVS 510 Quadro GPU, designed to fit an Optiplex SFF computer.
A wall mount for the Topton N5105 mini PC. Screws into existing holes in the rear of the device
This is my 3D-printable 6510 blower fan that uses a stripped down version of a 40 mm fan. you just basically cut off everything around the motor including the fan blades, and then the motor core can be press fitted into the hole, or can…
This bracket mounts a the Kompact Turbosmart Fuel Pressure regulator to the existing factory hood prop rod screw holes. I've supplied one model that just has the bracket so you add your own specific FPR model. The photo's show it printed…
Wanted a pi4 fan that was tall enough for a heat sink and used 2510 fans (it's what i had). Also added holes for 3010. This is meant to be used with the voron back plates that use M2 self tapping screws. I included a tall and short…
Printed upside down with supports with an Ender 3 on super quality settings. Replacement key for low profile ctrl. Category: 3D Printing
Adapter to mount dual 25x10mm cooling fans to 40mm. This directs more air to the heat break, greatly improving cooling.
The filament is black 1.75 hyper pla. I set the layer height to 0.12 for a smoother surface. The other settings are basic.
