1 / 3
Strain Relief Voron V0.2 Umbilical Dragon Burner w/Orbiter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to provide cable strain relief when using the Dragon Burner toolhead and Orbiter v2 Extruder
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 83
- Makes
- 0
- Views
- 1,552
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I made this small bracket to provide some strain relief for the umbilical on my Voron V0.2.
It fits the Dragon Burner toolhead by chirpy2605 with an LDO Orbiter extruder.
I think I was lazy when routing my V0's cabling - I didn't really follow the guide. I ended up routing my cables near the cabling of the Orbiter extruder's motor. These cables probably need some strain relief so this simple bracket attempts to do that.
- Use 2x M3x8 bolts to attach to the toolhead board mounts (I'm not using one).
- Check that the bolt heads clear the A/B motor drive units when at Y0. You might need bolts with small heads (mine just miss the motor drives!).
- Loop a small cable tie through the hole to secure your cabling.
