Cistern aerator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connector to install in a cistern and allow for recirculation/aeration of water
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I put a 330gal IBC tote (or maybe 275, I can't remember) for water storage at my property. Of course, I did not want it to get stagnant. I put a pump in for moving the water, and then just made a valve setup so when I'm not there, the pump will run on a timer every few hours to cycle the water through this aerator and keep the water moving a little bit. So far it's done pretty good.
You drill a hole in the top of your cistern and put this in, then discharge of the pump goes to the top where I have a ½" barb fitting for vinyl tubing.
Made from PETG but you can do PLA if your cistern is inside like mine. Message me if you want the fusion 360 files.