Hotend Cable Remover - X/P Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small tool to remove the hotend cables from the bambulab X1C or P1 series.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 365
- Makes
- 8
- Views
- 1,572
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hotend Cable Remover - X/P Series
To remove the hotend assembly you need to remove 3 cables.
I have developed this tool to help you remove these cables.
3 Step Removal - Each step has a number on the tool. this number should face up and indicate the direction to insert the tool.
INSTRUCTIONS:
Step1: The large connector (2 wires)
Use the large tool, insert it from the top with the opening facing down, once the tool is in place, pull lightly.
Step2: The medium connector (4 wires)
Use the large tool, insert it from the left with the opening facing the right side, once the tool is positioned, pull it slightly.
Step3: The Small connector (2 wires)
Use the small tool, insert it from the left with the opening facing the right side, once the tool is positioned, pull lightly on it.
BENEFITS:
- Fast to print
- Easy to use
- Small & Strong
- Designed for FDM Printing
- Smooth Operation