45° mount for eufy doorbell E340
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard mount was to flat so here is a 45° mount with internal cavity for running existing doorbell wires.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 229
- Makes
- 3
- Views
- 1,965
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Can be printed without supports but i would recommend to use them in the internal cavity.
Minimum of 3 wall lines and 15% infill (lines)
You need 2 M4 heated inserts to mount the original eufy frame to the new mount.
Printed in carbon fibre nylon but any other filament will do fine, just make sure to look out for abs in a sunny area because it will become brittle.
Please note that if you use regular screws to mount it to the wall they can easily steal it.
To be fair once you know how to remove it from the original mount it's also very easy.
Still, use it on your own risk.
Like the design?
Share some pictures with me ;)
You can support my work by sending me some beer money in the following link but don't feel pressured to do so.
https://www.paypal.com/paypalme/ognoizieworks