1 / 6
Square Wilka key cap / case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key cap / case that you can open and close.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 83
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the key case that you can open and close. There are two variants: with snap connections and flag.
For the snap one I recommend using smaller nozzle like 0.2 mm, do the snaps can be printer.
The flat one can be printed with standay 0.4 nozzle. This is a tight fit, but you can use a little bit of glue to prevent it from opening.