Loctite Glue Tidy V1.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Having the Loctite 435 glue primer (30ml) bottle topple over a couple of times and (apart from the fumes!) wasted its…
- Rating
- 2 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 264
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Having the Loctite 435 glue primer (30ml) bottle topple over a couple of times and (apart from the fumes!) wasted its expensive contents, I thought it time to create a device which would not only prevent the same happening again, but also keep the glue and primer in one place which can then also be carried around safely.
For those who need the size specs, the glass bottle well is 30mm Dia. and the glue bottle well is 25mm x 35mm.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
15
Filament:
Generic PLA PLA or PLA+
Notes:
Brims are a must on this one if using PLA, although you might get away without brims if using PLA+.
(I usually use Dimafix by default anyway.)
Be aware though that at 0.2mm resolution and 15% infill, it will take just under 6 hours to print, but will still save a lot of hassle and expense when it is used.
Post-Printing
Nothing much to do really, except smooth off the flat surfaces, round them off and square up the base with removal of the brim etc., using either a half-round or flat file.
How I Designed This
First created the cone as a standalone unit and then decided to add the glue holder to make it a self-contained all-in-one unit.
There is a shallow well to hold a few blunt-needle glue tips for fine work and a fourth, taller well at the back for holding longer glue applicators /pens etc.
Category: Organization