Replacement Furniture Cam Lock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.26 – €0.32 net (excluding VAT)
For file: EN3PRO_Furniture Cam Lock.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 22.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Furniture Cam Lock to replace missing pieces.
- Rating
- 4.333 / 5
- Likes
- 1,541
- Downloads
- 1,685
- Makes
- 11
- Views
- 9,229
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had and it's not a perfect replica, but it's fairly close. I was able to tighten it with no problem. I sliced it in Cura on .1mm layer height on engineering settings. I used a support blocker to so that just the bottom was supported, but nothing else. I found that without any support it rocked back and forth while printing and messed up. I've had trouble with supports this small though so I didn't want to add too much. I attached a photo showing the support blocker.