1 / 2
Revo Voron Adapter - Rat Rig Toolhead V1.0 BETA V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a adapter to mount a Revo Voron on the Rat Rig Toolhead V1.0 BETA V2
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 73
- Makes
- 0
- Views
- 778
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a adapter to mount a Revo Voron on the Rat Rig Toolhead V1.0 BETA V2.
You need to print a new toolhead front.
I tested the mounting, but did not print with it yet!
Additional hardware needed:
- 4x M3x6
- PTFE Tube 30.8mm
Assembly steps:
- Test the fitting of the PTFE tube. In case it doesn't fit, drill out the hole with a 4mm drill.
- Test the fitting of the M2.5 screws in the plastic adapter. Tap the holes with an M2.5 tap or widen with a 2mm drill if they don't fit.
- Mount the Revo Voron heatsink with 4x M3x6 to the printed adapter
- Mount the Revo Voron heatsink and adapter to the aluminium plate as you would with the Rapido Extruder