Mk4 Nextruder Hotend Assembly Box (MMM option avalible)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.96 – €2.39 net (excluding VAT)
For file: NoGraphic Nextruder Hotend Assembly Box v2_0.4n_0.3mm_PETG_MK4_1h47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.18 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 1.78 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2-piece box that stores a full nextruder hotend assembly (v6 adapter compatible) and 3 v6 nozzles
- Rating
- 4.667 / 5
- Likes
- 26
- Downloads
- 119
- Makes
- 6
- Views
- 763
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles.
It has a few small features on both short ends to allow it to have a slight interference fit with the cover, the tightness depends on the printer as well as the material used.
Manual Multi Material version involves the text stl (currently configured for 0.3mm layer height). Insert text is only one 0.3mm layer thick (so you only need to perform one filament swap) so make sure you use a really opaque and contrasting filament or it won't show very well.
MMM slicer instructions
Create a copy of the printer profile you like, set it to have as many extruders as you have colours (in this case 2), and check Single Extruder Multi Material
Go to “Custom G-code” and under Tool Change Gcode paste:
{if layer_num >= 0}M600 ; change to filament for extruder {next_extruder + 1}{endif}
then slice.
Load the colour you want to print the text out first, then the MMM print will perform an automatic filament change pause after printing the text, during so, swap to the main box material and continue.
You can also print without the text.stl for single material prints with an embossed text/image.
Version 2 comes with an expanded area for bent heater wires.
NoGraphic prefix has no graphics or text on the cover top.
Opaquer prefix means I made the text become deeper (0.6mm thick, aka, 2 0.3mm layers) aka 3 filament changes
Do not use the Opaquer models for “embossed” text style of printing as the layer between the emboss and the inside of the box is only 0.3mm thick
STEP file included if you wanna remix it.