1 / 2
Front-Load Washing Machine Door Prop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A prop for front-loading washing machines, to keep the door out of the way, but open enough to allow the inside to dry.
- Rating
- 4.5 / 5
- Likes
- 47
- Downloads
- 333
- Makes
- 2
- Views
- 2,606
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
A prop to hold open the door of your front-loading washing machine to prevent mould and mildew, while still keeping the door out of the way.
The holes on the base are covered with a single layer. This allows it to bridge over the bolt hole and print without supports. You can cut the hole out with a craft knife, or just punch through it with the bolt.
This model requires the following parts:
- 2x M3 heat set inserts
- 2x M3 bolts (anything around 8mm long should be fine)
- 6x 5x3 round neodymium magnets