1 / 4
Quick-change magnetic bowtie
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The title is self-explanatory… There two basic styles - classic and modern. Modern style does have few extra files-
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 35
- Makes
- 1
- Views
- 207
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick-change magnetic bowtie!
The title is self-explanatory…
There two basic styles - classic and modern. Modern style does have few extra files- two custom designs and a monogram button to be added at your convenience.
There are limitless possibilities:
- use two colors - each side with a different one - change in one second!
- no top or bottom (or both) layers, only infill you like (with two color option as well)
- add you own design to the bowtie wings - blank bowtie file included in the files
What you will need:
- Magnets of course! I use 8x3mm round magnets (these will do just fine https://www.aliexpress.com/item/1005006115927544.html?spm=a2g0o.order_list.order_list_main.5.71be1802tiJ5hU )
- one bowtie uses
- you favourite way to tie a bowtie, silk ribbon is recommended
Print settings:
- 0.2 layers - this is important, so you will always have 3 layers covering the magnet - don't forget to add a pause (color change) to your slicer at the appropriate layer
- when adding the magnets, don't forget to alternate the polarity - see the picture from the slicer, so you can have the effect as seen in the cover gif
- I print with 5 perimeters and 4 top/bottom layers
- 20% infill
- no supports needed
Happy printing!