Counting matching models…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This is a super easy Step-by-Step guide and model set for making your own custom QR Codes using only a single color of filament. While you can still use a different color at the last 2-3 layers if your printer supports that, it is…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
This is a geometrically CORRECT Hirth joint. It includes SOURCE files and DOCUMENTATION. There are a lot of Hirth joints out there. Some are completely wrong, some are very close, but almost none of them are geometrically correct. If you…
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased…
——Work in Progress—— [3 JULY 2025] Uploaded; Base_Top_v2.stl //Modified clearance, can set bearing easier Base_Bottom_v2.stl //Modified clearance, can set bearing easier and able to print without support. [5 JAN 2023] Uploaded;…
Since the usual filament clips for small filament rolls (250g) are impractical and too long, I have developed this filament clip. It MUST be printed from flexfilament (TPU)! I am aware that printing with TPU is a bit problematic.…
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
A tool designed for Alignment of model S door handles. Part numbers for teslas original tools: 1080985-00-A, 1080985-01-A, 1080985-10-A
a simple tool to help align the magnatic sheet of the Kobra Neo bed. it should work on other models with same bed dimention and structure. If the washers hight under your bed is smaller than the model, you can simply cut the model from…
Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing
Using the standard cereal box available from Amazon as used in the GunplaMark design I made some modifications as listed to improve some components. A heads up on reactivating the silica gel. According the mfg you can put it in the…
Reimagine your Qbrick System with modular compartments to elevate your storage and organisation experience. Precision-engineered and built to integrate seamlessly into your Qbrick setup, these sturdy compartments bring style and…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
There is a twin model that does not have a hidden compartment: https://www.printables.com/model/989143-david You will need to add supports on the head. I let PrusaSlicer figure out where they needed to be and used organic type supports.…
Hello, i have greated a alignment tool for Shimano SPD Cleats. Its created in two different sections, you can print it also on small print plates. If you have some improvments for this feel free to contact me.
I recreated the whirlpool dishwasher top rack end stop as closely to the original factory part as I could using Fusion 360. It fits as well as the original piece but there is room for some improvement. Print Settings Printer Brand:…
A thicker and stronger toolbox clasp/latch for the Stanley STST18631 stacking toolbox. The photos show my model compared to the original latch. This is a remix of a latch that has even spacing for the hinge. This model has an odd spacing…
This collection includes a variety of low poly town elements, from houses and shops to streets, lamps, fences, and other urban props. With simplified geometry and clean proportions, these models are designed for stylized projects, modular…
Hello, I have made a documents organizers for HSW system. I have some instructions in A5 or smaller format, so I decidecded to creathe this project. I have used hexagonal pattern to limit filament consumption. Also looks cool with HSW…
PLA or PLA+ will work just fine. You can print it with PETG if you like it sturdier. 92 mm inner diameter. 60 - 70 mm depth.
Hello, I would like to present my version of the dry box. I was inspired by this model: Link to the model In all the boxes I've seen so far, the spools are upright. This bothered me a lot, so I came up with a horizontal variant. The box…
This is a box for meteorological instruments (such as a thermometer or a hygrometer) that protects them from sunlight, water, snow, and strong winds. This box is based on a prior design I made and uploaded here . After days of frustration…
Print two and place on either side of the gantry to hold it level while you fix the gantry in place. use to check if the gantry has shifted or to hold the gantry while you work on the printhead. When using place the tools on either side…
LUBA 2 mini AWD 800 replacement cutting disk It could fit other LUBA's and YUKA's. Please let me know if it does in the comments and share a pic :) I recommend that you print with something more durable than PLA. It could be ABS, PETG or…
Color coding the filament path is simple and with just a glance you can see which filament is being extruded. This saves time and helps prevent printing mistakes. History One of the issues I have always seen is filament pushing through…
No remix just the stl file for "Army men base" as only a f3d file was available to download. Please like and share the original :)
I've been using these printed in PETG for the better part of a year without issue. Replacing the altitude lever-knob This is a drop in replacement. Start by removing the original lever and spring by unscrewing the internal screw. The…
This is a replacement drip tray for the Krups Pixie Nespresso coffee machine I first made this replacement version. When everything fitted fine like it should, i made a large version with a LED 'full' indicator. It contains a round…
Wenn man eine Allergie gegen Blumen hat oder gerade keine echten parat hat ist das die perfekte Dekoration
ON YOUR OWN RISK! In general you need heat to dry filament. Only silica gel etc. is not enough to move the moisture out of your filament. If you don't have a dryer like me, you can use your print bed for drying. You can use a small box…
Parametric spool alignment disk for the Filament Spool Switcher & Winder for Bambu Lab AMS
I made huge cleanup of K40 laser. I need to adjust laser path after that and I'd like to use a safe laser pointer for such work before I load 40W of laser power into it. So I designed these little disks for holding small laser pointer in…
Hello This is a straight version of a bass serpent however in soprano size. It has been modelled in Catia. The model had been cut to be printed in smaller part. it shoud work with any standart trombone mouthpiece. I will publish an…
Hello, I have a Document Case with a map on the arm holder for you. It is a map holder, on the hand. Suitable for Airsoft, paintball, or other strategic games. You have 3 versions from me - Empty, Atom nuke symbol, and predator symbols.…
I wanted to share the games I played during my childhood with my daughter and while I had the original consoles, I couldn't find a good (and affordable) way to play them on modern screens. Emulation lacked the physicality of cartridges.…
A rugged box I made for my popular filament samples . Just a little something to use instead of the box I already made. There's also some “tweezers” to use if you find the sample cards too hard to grab. It snaps in place inside the lid.…
A friend asked me to print some name plates for his apartment building's mailboxes. I'm writing these instructions for myself, in case I need to print more later. You can use this model to make different sized signs with text – just…
The button on my pressure switch button wore out, so I was unable to turn off my compressor. Use 100% infill (The weight helps with retention of the button) PLA worked for me, if your compressor is in a warm environment, I recommend…
Bring your Business or side hustle to life with Filament samples! These Filament samples are simple but also see the layers, colors, and type of filament whatever you’re showing. 6mm keyring Hole 80mm x 21mm STEP. File included I mainly…
A remix of the humidity holder to fit the ones with a beveled face from the likes of AliExpress . I recommend printing 2 of these (one for each end) as it holds it very securely. Easy print with no supports if printed on its side.
Overall: A “refined” version of the Inline Filament Sensor by Ryan-G that was remixed by Turpinator to resolve some of the slight issues I had during use. Details: I really like Ryan-G's inline filament sensor, it's simple, small and…
There are three parts to this (Left, Mid, Right), all of which are about 2" wide to accommodate wall mounting tape ( This is the one I used). I suppose if you wanted to, you could just print only the left and right parts and mount them…
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
NOTES: 3D printing isn't a food safe process, filaments have unknown additives and colouring chemicals, brass nozzles can contain lead, and layer lines are shown to trap bacteria and cannot be adequately cleaned; as such this design is…
This model replaces the OEM covers that come with the line tracking module on the fourth version of the Elegoo Smart Robot Car. They keep the sensors from bending back if there's an impact, but they can come off and are easily damaged.…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
Print in place filament spool clamp. Printed on a Prusa MK3S, using a 0.6mm nozzle with 0.3mm layer hight, using organic supports automatically generated by PrusaSlicer.
Quick design to fit quart mason jars. Has posts to keep whatever you're fermenting submerged without weights with a hole for standard airlocks: https://www.amazon.com/gp/product/B00IGXQ5I4/ref=ppx_yo_dt_b_asin_title_o01_s00 Category:…
a box for pens small tools sweets or whatever you want it is simply printed in vase mode after printing you can simply slide the filament (1.75mm) into the openings provided to get the cool 2-colored look The size can only be changed in…
One-way fermentation plug with water valve. Inspiration for Czech speakers: https://www.zkvaseno.cz Print with 100% fill. I recommend using a non-toxic PET-G filament with food grade certification. Aim to achieve watertight print…
Ender 3 Filament Guide
This is a small (18mm) inline filament cutter that mounts to a bowden tube. It utilizes 2 springs from click pens (3.5mm ID x 20mm long) and a 9mm snap blade section as well as two PC4-M6 fittings for parts. The threads are M6x1, I…
This is just like my other apartment building model except this time it has stairs at the bottom! you can scale it as needed to make models for trains cities or anything else!
So today a part which holds the tensioning thing on my Samson SR850s has decided to snap. After 5 years it's understandable I guess. Print instructions: Low layer height, like 0.2 or 0.1 mm (because of in-design supports) 0.4 nozzle…
Update: I made some changes to the sample. The overhangs are now real overhangs and the stringing/cones/cylinders-section is more efficient now. Further I added a test for sharp corners and another bridging-test. (The green sample is the…
Velociraptor ornament to adorn your Christmas tree, or hang it up year round... and who doesn't think a velociraptor brings holiday cheer. Can be printed without supports. Variable layer height will produce nice results 3MF files have…
Hello everyone! Before you start witch hunt, calm down. I have Full licence for use Hueforge. Legendary robot .. WALL-E “Waste Allocation Load Lifter: Earth-Class” ################################################################## Print…
This is a modified model of my original filament cleaner for the core one printer. It can be printed easily without supports. You just need to cut a piece of sponge and it works, just pull it onto the end of the tube. I uploaded two…
I nedded a box not to forget to take all my supplements every day. Everything I can buy couldn't fit 3-5 pills of creatine, so I made this. It is compact and can stand on a side. It has 7 conpartment for every day of the week. The middle…
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
EDIT: I've made a better detachable version! I recommend using it instead: A short 1-slot USB implement. It fits very nicely in my Roxon Mini Flex Companion. For usb drive, you would want to use an ultrasmall drive like this or similar:…
Bed adjustment wheel for bedleveling M4 knurled nut: https://www.amazon.de/dp/B07MYXGKS6?ref=ppx_yo2ov_dt_b_product_details&th=1 After printing, the inner diameter should be 16.02 for pressing.
Most gridfinity socket organizers fit the OD of the socket. Not only is this dimension not standardized across different manufacturers, but this also wastes lots of filament. The post fitting sockets is obviously standardized. Putting…
Heart Christmas tree ornament. Can be used also as cute Valentine's Day keychain. Hand drawn design converted to 3D. Would be nice to use also as some Easter decoration to hang on tree branches. You can try to print small scale to make…
Better organize your reef Moonshine elements into this carrier for easy daily dosing. Cup diameter is 70.5mm so it will fit any bottle within that range.
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Specifically for Living Spaces' white dining chairs. Common issue to lose chair feet and Living Spaces doesn't have replacements. Had to take matters into my own hands. Lost image is the original, 2nd to last is the printed part. Works…
EASY FilamentSamples (only 20min print)
Here is a small document organizer for your desk Added a reinforced version
Hey guys . I saw some ways of mounting rails to my walls for the spools i had but i thought every signle one was way flimsier than i imagined. So i designed this one , its pretty standart and im using 15mm hollow aluminium rods and it…
You need to drill a 7mm hole for the Filamentguide to passthrough.
OpenScad file and STL files to print 4 compartments for primaSelect or easyPrint spools, will add more spool and improve on the design as time move forward. Print instructions use 0.2 layer, spiral vase or spiralize outer contour
I do not have that many spare tips and wanted to use the tip compartment in the top insert for something else. So I created this insert which has a space in the cable compartment for one extra soldering tip. Also check out my slightly…
The Nespresso Pixie (Delonghi model) has a drip tray which does not allow for tall coffee cups/mugs. This replaces the drip tray assembly and allows for large coffee mugs for your delicious brew.
Ireland Residential Cum Store building
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
This is a simple alignment tool to line up the labels for the S3XY buttons by enhance auto.
Ein Clip um das Filament auf der Spule zu befestigen. Einfach das Filament durch das kleine Loch schieben, den Clip von der Aussenseite auf den Spulenrand schieben. Der Clip verbiegt sich etwas und klemmt das Filament fest. A clip to fix…
Labels for Modular Filament Storage System. Mounting on the rod. I recommend printing with 0.15 or 0.2 mm layer height from PETG for optimal flexibility when attaching to the rod.
This screw is a remake of the original one that is supposed to come with the light shades, we bought multiple ones but for some reason one of the shades didn't come with one, instead of going back to the store i picked up the calipers and…
This model was inspired by several spring actuated rewinders on Printables.com. Chief among these was: https://www.printables.com/model/678300-compact-spool-auto-rewinder This model is parametric allowing varying hub diameters and spool…
Now you can sort the screws directly into practical bins! Use my d3 bins (d2 wave can be used for 40 & 35 mm slots) to keep them separated. I found that the upstream handle caused binding, so I recommend using the “contour grip” instead…
I was fixing a game cube for my brother. It has apparently lived a rough life before he got it. As with many of these consoles I have seen at some point it has fallen on something and busted up the side vent grating. I figured I would…
Print however many segments and one end for each side and connect with 2x connector for each connection. Some supports required.
Many old Polaroid 600 cameras (the black original 600s from the 80s) suffer from brittle strap loops. I have designed and successfully printed these replacement ones, that are slotted to reuse the original sewn straps. Print with the loop…
Splitter Filament with microswitch KW11-3Z.
This is an accurate model of a large 12v momentary switch/button, created to assist with the design of racecar switchgear. The model includes both a “standard” and a “fully functional” version. The standard is a simpler design that does…
A model of an empty AIO Robotics filament spool. Model not intended for printing, mostly for exploring the re-use possibilities with a filament spool of these dimensions. The side gaps and filament slots haven't been modeled yet, but the…
Remixed the model to add a small backplate with a 3mm hole to work as a doorknob. Printed as 3 parts so the filament has another color.
A simple filament holder for those who like their filament close (and have a deep desk!). All you need to complete is a ¾" dowl of your choice of length. There is a version with a screw hold and a version without.
Filament Spool Shelf brackets. I am using 7/8 wood dowels from Home Depot (but can also use 22mm stock as per the original bracket . I added #6 Flat screws holes to my design to screw everything in place. I used #6 in ¾ in size. The…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Print all external pieces flat on the bed and use tree supports to support the upper part of…
Tento model jsem dělal v blenderu. Vrstva: 0,15 Podpěry: jsou potřeba Výplň: Je na vás
Parts: Ball bearings: 8-10 x 5.5mm (7/32in) Only required for enabling spool rotation. Printing: No supports needed. Files are provided in the correct printing orientation. Assembly: Print Swivel Piece 1 & 2. Place the ball bearings in…
