Inland Reusable Filament Spool v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No hardware required! Should work for Inland, Bambu, and Polymaker refill spools.
- Rating
- 4.731 / 5
- Likes
- 153
- Downloads
- 1,974
- Makes
- 26
- Views
- 5,675
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout.
I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher can result in overhang issues on the threads. No supports needed.
Do not remove straps on filament roll before installing on holder. Align the cardboard side with the notch cutout with the outside model. Do not overtighten.
Updates:
06/08/2025: I have updated design for the new rolls of filament being sold at Microcenter. New cardboard rolls are 80mm in diameter and have a notch cut out.
02/02/2026: Added a more AMS friendly version that is has larger outside diameter. Also updated the filament end passthrough holes.