Voron 0.2 - 5 inch HDMI screen mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a 5 Inch "Elecrow - Display B" screen that fits onto the stock Voron 0.2 skirt.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 95
- Makes
- 0
- Views
- 1,452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimal display case/mount for a 5 inch HDMI display that fits to the original V0 Display mount…no skirt modification needed. You can check the dimensions on the official Elecrow website :
____________________________________________________________________________________________________________
BOM :
- 1x 5 inch Elecrow HDMI touchscreen
- 1x printed case
- 2x printed mounts
- 4x M3x8mm BHCS
- 4x M2x10mm selftapping
Instructions :
If using the same display (type B) you have to snap off the 4 screwing mounts on each side - there should be ~2mm left, see picture below :
Push the screen into the case and fix it into position with two mounting brackets - using 4x M3x8mm screws.
The screen will be mounted to the original V0 Display mount using 4x M2x10mm selftapping screws.
