Case for SKF Feeler Gauges 729865 B
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple case for the SKF Feeler Gauges 729865 B. They come without a case, but deserve one.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
3 files:
I have uploaded 3 files, one variant for the bottom part and two variants of the top part. One with text and one without.
Tolerances
I have designed the parts with 0.2mm of clearance between sliding surfaces, so they slide against each other with only a small amount of friction.
About the photos:
The model in the photographs has slightly thinner walls. I added 1mm to each of the two sides that have dove-tails on them, for increased strength.
The CAD-pictures shows the correct wall thickness.
Suggested print settings:
Print material: PLA
Nozzle: 0.4mm
Layer height: 0,2mm
Infill: 15% Gyroid
Wall line count: 3
Bottom & Top layers: 6
Supports: No
Printing time:
Around 1h & 20min per part on my Elegoo Neptune 4 @ 250mm/s.
Total 2 hours & 40 minutes