Flashlight cover for snorkeling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple cover for a cheap flashlight that withstands water pressure 30 m deep.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 63
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The best material is SLA resin or PLA with 100% infill (set high number of perimeters).
Print the middle part with flexible filament, glue everything together with superglue. Use a color change or cut the bottom part to make it transparent.
The best transparency can be achieved with SLA transparent resin or non-3D printing method.
Treat the thread with silicone grease, don't forget to use a proper sealing between parts. I suggest using O-rings but soft gaskets also work fine.
The cover fits this flashlight: https://www.aliexpress.com/item/1005001839188982.html?spm=a2g0o.productlist.0.0.a36a6035dXgr4U&algo_pvid=7a59d7a1-ca51-4f82-9349-16de7df0469d&algo_exp_id=7a59d7a1-ca51-4f82-9349-16de7df0469d-0
Don't forget to read my article: https://blog.prusaprinters.org/watertight-3d-pr…ing-part-2_53638/