Remix of Semi-Flex Clasp for Spannerhands' filament box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Semi-Flex Clasp Remix with PETG
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
The Semi Flex Clasp did not work out for me when I printed it with 95A TPU; even at 100% infill. Just seemed to flex too much when closed allowing the lid to lift slightly. In addition, I did not want to get 98A TPU and I wanted to use a more common material.
I remixed the original clasp to allow non-compliant materials for use. My remix changed the top wrap around clamp to simply slip on. Now the clasp can be printed with hard materials like PLA or PETG.
I then print my design with no top or bottom shells, 1 perimeter shell, and Aligned infill in the 15-25% range. With no top or bottom shells the non-compliant material is flexible enough to stretch and hold the lid tight.
I suggest PETG as it is more flexible than PLA but this clasp uses very little material, about 6 - 10 grams depending on infill %, so please experiment! So far 1 perimeter has worked well. More perimeters will increase stiffness and durability.