Raspberry Pi 3/4/5 Case Holder for IKEA SKÅDIS
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.32 – €0.39 net (excluding VAT)
For file: skadis-rpi-case-holder_0.4n_0.15mm_PETG_MK3S_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
IKEA SKÅDIS RaspberryPi case holder that snaps in the case's back vents.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 201
- Makes
- 5
- Views
- 1,323
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA SKÅDIS Hook for Raspberry Pi Cases
🚀 A quick, easy-to-print solution (under 30 minutes) for snapping Raspberry Pi 3/4 B+ or Raspberry Pi 5 cases onto an IKEA SKÅDIS board.
⚠ Important: Do not use the first vent to avoid damaging connections - refer to the pictures for correct placement.
🛠 Tested Settings:
- Materials: PLA & PETG
- Layer Height: 0.15–0.30 mm
- Infill: 15–20%
- No brim or supports needed
✨ Keep your 🥧 organized ✨