1 / 4
Land Rover 332215 B/C-Pillar Rubber Corner — image 1
1 / 4

Land Rover 332215 B/C-Pillar Rubber Corner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The B/C-pillar rubber corners often deteriorate and replacements can be quite expensive. So you can print your own 🥳

Rating
0 / 5
Likes
4
Downloads
30
Makes
0
Views
218
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

General

This is a replacement for the rubber corner for the Land Rover Series and early Defender B- and C-Pillar (part number 33215). Commercial replacements are available but as you need 4 or 6 for each vehicle, printing can be cheaper.

The original rubber is very soft, so I recommend you to get the softest TPU available to you and printable on your printer.

 

Versions

“Neutral” - Both sides are equal like the original part. You can print the same parts for all corners.

“Corner Specific” - These models are skewed to the angle of the side walls, resulting in a nicer fit. But they are not universal anymore and you have to print all four for the four corners.

 

Print Settings

  • Use TPU or other flexible filament (as soft as possible)
  • Infill depending on TPU hardness, 90-100% is probably desireable to avoid too much “squishing”

 

Special thanks to https://www.printables.com/@CasperMeyhoff_710172 for providing measurements and photos for replicating this part 👍

Please consider liking and posting a make if you find this useful 🙂

Tags