1 / 6
Top Feed/Guide Socket (PTFE via Festo QSM M5-4) for Original Prusa Enclosure for Prusa MK4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This socket is for filament feeding/guiding directly from dryer to extruder.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 91
- Makes
- 1
- Views
- 748
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I used 0.4 Nozzle, 0.2mm Layer Height, 4 Perimeters, Solid infill, . Printed fine without any supports on MK4 (when parts oriented flat on). I used Prusament PETG-CF.
Other items needed:
3x Festo QSM M5-4 (2 for socket: A+B and 1 to extruder)
2x M3x8(or M3x12)
2x M3n
Tools:
1x Original Prusa wrench
1x Narrow Pliers or narrow tip wrench (it will be hardest to screw in Festo Socket into Part A)
Check out how it looks and operates when installed in the end of this video:
Original Prusa Enclosure + MK4 Air Exhaust Installation (youtube.com)