Search results: festo

Counting matching models…

Printables

Festool battery holder 18V

Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník

Printables

Festool D36 to 2 1/2" hose adapter

This is an adapter for attaching Festool 36mm hose to a “standard” 2 ½" dust collection port. I designed it for using Festool dust collector with D36 hose with my my table saw, router table, planer, jointer, bandsaw, etc. I was using…

Order a print of this model

Printables

Festool Dust Collector 38mm hose Adapter to Milwaukee M18 Sander

Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.

Order a print of this model

Printables

Festool multihook / General purpose stand

This is my design for a modular multi purpose tool. It is: a stand for: a smarphone or a calculator; a laptop or tablet, if you print two ones and place them side by side; two hooks; a cable runner if you use only the Festool multihook…

Order a print of this model

Printables

Vacuum Clamp (fits Festool MFT)

Render preview: Here's a quick video demo: Assembly diagram for compressor setup Assembly diagram for vacuum pump setup BOM (with links) M3 x 10mm (x8) for attaching the top M3 x 22mm (x2) to attach the valve Male Thread Quick Release…

Order a print of this model

Printables

Square for guide rail Makita/Festool

Both models are printed without supports. The models are connected with an M4 screw and nut.

Order a print of this model

Printables

skeleton Festool battery mount

skeleton Festool battery wall mount leyer hight 0.20mm infill 15%

Order a print of this model

Printables

Festool Sander Base for Custom Systainer Inserts

Festool Sander base for custom Systainer inserts. Fits the ETS-125, RTS-400, and DTS-400, all of which have the same body. Created by scanning an original Systainer insert and then modeling around it with F360 forms and surfaces. The…

Order a print of this model

Printables

Festool conector

Festool conector to another festool table. Made it for conecting two festool table to make another one bigger, like modular table

Order a print of this model

Printables

Systainer Organizer Boxes 42,5 FDM-Printer friendly Tanos/Festool/Bott

Plastic containers Box for Systainer Organizer. The boxes are fuly compatible wiht the original containers and the gen3 Systaner System. Stack 2 on each other the hight is by 68mm. Printing The Modells are designt with following printing…

Order a print of this model

Printables

Festool - Jigsaw Splinter Guard

Witam! Przedstawiam podkładkę antyodpryskową do wyrzynarek firmy Festool. Podkładka zaprojektowana w taki sposób by poprawić widoczność linii cięcia, umożliwić dokładność cięcia oraz ułatwić demontaż. Drukujcie w 100% wypełnieniu.…

Order a print of this model

Printables

CARVEX PSC 420 / PSBC 420 label for Festool systainer T-LOC / SYS3

Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla wyrzynarek marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym samochodzie może się…

Order a print of this model

Printables

Festool - Wide Vacuum Cleaner Nozzle

Witam! Prezentuję szeroką końcówkę odsysającą do odkurzacza marki Festool i innych z możliwością przytwierdzenia do dowolnej powierzchni. Pozdrawiam!

Order a print of this model

Printables

Festool - Partition Wall for SYS3 S 76 Systainer

Witam! Prezentuję ściankę do systainera SYS3 S 76 marki Tanos / Festool umożliwiającą uzyskanie 3 osobnych przegród w systainerze. Pozdrawiam!

Order a print of this model

Printables

Festool - Battery 18V Holder with Airstream

Witam! Prezentuję uchwyt na baterię 18V marki Festool z kanałem powietrznym AIRSTREAM. Pozdrawiam!

Order a print of this model

Printables

Festool Domino Rail Adapter

You will need two m5 screws ~12-16mm long to attach it. Print in PETG and with as many walls to make the narrow part solid. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without…

Order a print of this model

Printables

MFT/3 Festool clamp holder fs-hz 160

Best printed with PETG, no support. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without permission. Please consider canceling your Prime subscription and support non US buisnesses.

Order a print of this model

Printables

Holder for Sortainer box on Festool MFT/3

Order a print of this model

Printables

Holder for sys3 box on Festool MFT/3

Order a print of this model

Printables

Festool OF 1010 EBQ axis lock button

Small, quick-to-draw but functional button. I put 3 walls.

Order a print of this model

Printables

Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Order a print of this model

Printables

Prusa CORE One/+ MMU3 3-Way-Splitter FESTO (compatible with Lite version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…

Order a print of this model

Printables

Prusa CORE One/+ MMU3 4-Way-Splitter FESTO (compatible with Lite version)

Order a print of this model

Printables

Festool Systainer labels - All machines

Labels to put on systainers - they match the original size

Order a print of this model

Printables

Support d'accessoires pour Cyclone Festool CT-VA-20

Ayant un cyclone Festool CT-VA-20 sur le dessus de mon aspirateur CTL, je cherchai une place pour ranger les accessoires de l'aspirateur, c'est-à-dire : la poignée les 3 tubes le balai de sol le suceur fin la brosse Le but est d'avoir…

Order a print of this model

Printables

Gridfinity Festool Systainer Mini SYS3 S 76

There are several models out there which allow you to add the Gridfinity system to your Mini Systainer. Besides simple grid models, some guys designed some interesting models that use the available space more effectively, for example,…

Order a print of this model

Printables

Festool TKS 80 EBS stop (aluminium profile) V2

I was missing a "limiter" 4 the angle stop of my Festool tks 80 EBS. It is quite annoying to do repeatable cuts without it. New versions online. Check em out yourself :P In addition to the printed parts you will need M5 x 20 (25?) Screw +…

Order a print of this model

Printables

Label FESTO for Tanos systainers T-LOC and SYS3

Witajcie! Udostępniam wam nową wersję etykiety z logiem FESTO upamiętniającą 100 lat marki FESTOOL! Pasuje do systainerów drugiej T-LOC i trzeciej generacji SYS3. Możliwość wydruku wielu wariantów kolorystycznych! Kolor zmienisz na…

Order a print of this model

Printables

Festool Systainer Rails

I finally created a systainer rail for my older Festool systainers that have been stacked up on the garage floor for too long. They work great and of course they are way cheaper than buying the Festool brand rails. I used all of my old…

Order a print of this model

Printables

End stop for Festool tracks

End stop for Festool track saw tracks and compatible tracks. This can be used to make cuts of a defined length and position. It can also be used with a router. A use examples with a router is in the photos. To be able to make a Festool…

Order a print of this model

Printables

Tool Holder festool t18

Test

Order a print of this model

Printables

Anschlagstop für Festool MFT/3 - Guide Rail Stop for use with Festool MFT/3

NOTICES: Non-commercial, free-of-charge provision of a single construction file in STL-format. This is a simple Guide Rail Stop for use with the support unit and swivel unit, respectively, of a Festool MFT/3 Rail Guide. The MFT/3 comes…

Order a print of this model

Printables

eksand / surfprep to festool adapter

adapts the threaded eksand port to a 36mm festool hose works with surfprep 3x4 sander too

Order a print of this model

Printables

Dewalt DW734 Thickness Planer Dust Port to Festool CT Series Hose Adapter/Reducer

I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…

Order a print of this model

Printables

New: Festool Track Dust Hose Deflector & free Bumper (new design)

New vacuum hose deflector for Festool guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…

Order a print of this model

Printables

Festool STF D125mm sand paper hole punching template

Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance. With this jig you can: Use generic or bulk sandpaper with Festool STF D125 (125mm) sanders Punch the correct hole pattern into…

Order a print of this model

Printables

Festool Systainer SYS3 Drawer Gridfinity Base

This gridfinity base fits the Systainer SYS3 3 drawer set. Allows for better customisation than the systainer dividers and boxes. I print in ABS as I use and abuse them and they hold up well. PLA and PETG would also work. If your…

Order a print of this model

Printables

Festool / Tanos Systainer Micro inlay

Always wanted so foam inlay for these for various uses, but I think something like this makes more sense for me right now. Will add some other versions soon as well. Printed it on the bottom, Really most settings should work, as should…

Order a print of this model

Printables

Festool Adapter For Segmented Vacuum Hose

Short connecting link for Festool vacuum hoses (ID 35mm).

Order a print of this model

Printables

Festool Hose Ceiling / Wall Dock (27mm/36mm Cleantec)

Space-saving ceiling or wall mount for Festool Cleantec hoses.

Order a print of this model

Printables

Festool Plug-It Metric Version

Screws needen: Main Housing: 2x M4x12 socket head screw Round Head: 3x M4x16 socket head screw Flat Head: 3x M4x12 countersunk screw

Order a print of this model

Printables

Festool Domino - DeWALT Vac Airlock adapter

Doporučení k tisku: PETG/PLA, 3 perimetry, 15-20% výplň. Při tisku užším koncem na podložce stačí podpěry pouze pro vnitřní malé konektory. Printing recommendations: PETG/PLA, 3 perimeters, 15-20% infill. When printing with the narrow end…

Order a print of this model

Printables

Connector for Makita/Festool Rail Guide

Work either as a connector between two rail guides to extend, or as a fixture onto something else such as in a jig. Printed in PLA-CF for stiffness and toughness. Holes diameter is for M4 screws.

Order a print of this model

Printables

Bit-Inlay für den Mini Systainer (SYS3 XXS 33) von Festool

Bit-Inlay für den Mini Systainer (SYS3 XXS 33) von Festool Dieser kann u.a. unter https://www.festool.de/produkte/fanartikel/fanartikel-buero/205398---sys3-xxs-33-gry erworben werden. Abmessungen: 93 x 58 x 10 mm (Griff 10mm) Für 34 kurze…

Order a print of this model

Printables

Festool Bit cassette holder

Festool Bit cassette holder - simplify your tool management Where do you currently store your bit cassettes? Print your own Festool Bit cassette holder and make your everyday work easier and more productive. Don't have a Bit set yet?…

Order a print of this model

Printables

Brace for Festool MFT

For those who don't want to pay over $100USD for a brace that should be included with the table, here is an alternative. You will need fasteners and two pieces of 1/2 inch x 23 1/2 inches long metal electrical conduit, and you have the…

Order a print of this model

Printables

Milwaukee Router Festool / Powertec / Makita Tracksaw adapter

I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…

Order a print of this model

Printables

Festool extractor twin hose Y adapter

A more space-efficient twin-hose Y adapter for Festool dust extractors with hoses facing to the front. Can take the Festool slide blast gates and after-market 2.25" / 63 mm options as well. Print with the twin hoses down on the print bed,…

Order a print of this model

Printables

Elegoo Centauri Carbon 2 ECC2 Canvas single filament PTFE tube holder on Bracket Festo

rotatable single filament ptfe tube holder. mounted where canvas system used to be. it has to be printed in three parts. the universal mount gets on the canvas mount. the arm can be slided onto the universal mount and be rotated so every…

Order a print of this model

Printables

Festool to Milwaukee vacuum adaptor.

Festool vacuum to Milwaukee clip adapter. For connecting Festool Vacuum to Milwaukee Tracksaw, Router, Planer etc. Festool side uses the OD of the standard 27mm hose and has locking barbs. Milwaukee side uses the OD of their stupid clip…

Order a print of this model

Printables

Festool splinter guard for TS 60 KEBQ

Printing: Model has integrated, easily removable supports. I reccomend printing from PLA which holds very well after many cuts. I also tested PETG but it broke quite fast. Happy printing and cutting!

Order a print of this model

Printables

Spannzangenschlüssel für Shaper Origin oder Festool collet wrench

Simpler Spannzangenschlüssel für Shaper Origin oder Festool. Gedruckt mit 3 Außenwänden und 10% Infill in PLA Englisch Version: Simple collet wrench for Shaper Origin or Festool. Printed with 3 perimeter walls and 10% infill in PLA.

Order a print of this model

Printables

Birthday Festoon/Bunting (German: Alles Gute)

Since I did not want to cut out paper buntings for a birthday festoon, I printed them. Some inner parts of the letters are not fixed. I decided to glue them in place on the backside with a thin thread to make them hardly visible. If I was…

Order a print of this model

Printables

Copy Ring for Festool OF1400

This is a copy ring for Festool OF 1400 router. Thanks to ChowS on Makerworld for making the initial model. I remixed it so that you can print your own inserts. The accuracy and robustness of a 3D printed model will not be sufficient for…

Order a print of this model

Printables

Festool Winkelstück CLEANTEC Handkreissäge / Festool angle piece CLEANTEC hand circular saw

Hey, der Ansaugstutzen von meiner FESTOOL Tauchsäge war sehr locker und der schlauch vom Staubsauger hielt nicht mehr perfekt somit hab ich dies erneuert und es klappt perfekt gedruckt mit 100% ist es perfekt. hab spass beim drucken Hey,…

Order a print of this model

Printables

Festool Domino Vacuum Dust Port Adapter to 1-1/4in Hose

This adapter can be used to connect a Festool DF500 or other similar tools to a Ridgid (or similar) 1 1/4in dust hose. The dust hose is a tight friction fit and the Festool connector uses a tabbed twist lock. It's a secure fit to ensure…

Order a print of this model

Printables

Pegboard festo mount

Update: I've added a new picture and stl that has a ptfe stop at the top with a 2.5mm hole for filament to pass through. This will keep the ptfe tube from being pulled up the holder if you ever need to pull on the filament for something…

Order a print of this model

Printables

Handschleifer - Staubabsaugadapter + Festool Anschlussmuffe / Hand Sander - vaccum adapter + Festool connector sleeve

Handschleifer mit Staubabsaugadapter Für Schlauch Innen-Ø 25-mm Außen-Ø 33-mm Anschluss für Festool Anschlussmuffe oder mit angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H +…

Order a print of this model

Printables

Festool Domino Dry Fit Tray

This tray is the companion piece to my Festool Domino Dry Fits models . It is engineered specifically for those dimensions, but should work equally well with other dry fit prints - or any tenon-shaped part you want to store upright. These…

Order a print of this model

Printables

Festool CTL hose adapter for standard 32mm vacuum cleaner pipe

Remix of the Handle and adapter by Thyn. Combined the models and resized them to fit a standard 32mm vacuum cleaner pipe. Should be compatible with most Festool CTL/Cleantec vacuums and standard 32mm vacuum cleaner pipes Fits perfectly…

Order a print of this model

Printables

Festool Kapex Zero Clearance Insert

Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…

Order a print of this model

Printables

Festool Domino Glue Nozzles Adapter

Danke an Steve Rowe für das Model. Habe bei dem Spül-adapter-Titebond-Verschluss das innen Gewinde in 3/4-Zoll-Gewinde geändert für ein Gardena Schlauchstück 3/4" (0917-20) Flachdichtung ¾" 17/24/1,5mm jetzt kann ich auch mit Warmwasser…

Order a print of this model

Printables

4 Einsätze für Festool Systainer 3 M112

Vielen Dank an argoroots für die Vorlage. Ich habe sie verwendet, um 4 Einsätze für den Systainer 3 M112 zu erstellen. ________________________________________________________________________ Thanks to argoroots for the template. I used…

Order a print of this model

Printables

Jaws for Festo grippers

Technical Specifications: Multi-Range Robotic Gripper Jaws This design offers a highly versatile solution for robotics and automation. It features three distinct gripper zones to handle a wide variety of parts. Instead of relying on…

Order a print of this model

Printables

Festool Systainer 3 M112 Labels Domino Dowels

Labels for Festool Systainer 3 M112 Domino Dowels

Order a print of this model

Printables

Festool OF 1010 Circle Jig

Vandisphoto's design on thingiverse works fine as it is, but I wanted some markings for easier measurement, + the little "L" sticking up on the top just irritated me. Hardware needed: 2x 8mm rods (the ones that come with the router, or…

Order a print of this model

Printables

Festool FS-WA-90deg Adapter for Systainer

a holder for the old Festool Systainer, I used double sided tape, I drilled two holes through the top holes and fixed it from the inside with a thumbscrew Please don't forget to “Like” the model. / Bitte vergiss nicht das Modell zu “Liken”.

Order a print of this model

Printables

Festool Vacuum locking Crevice tool head

Crevice tool I made for my Festool Vacuum… lugs lock head into place with the normal twist action. Recommend printing in a hard flexible such as 95A TPU for an extremely tough part that will stand up to abuse and also not scratch/damage…

Order a print of this model

Printables

Guide Rail Holder for Systainer T-Loc I-V (Tanos, Festool, Berner, Metabo and Co.)

Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…

Order a print of this model

Printables

Spirit Level Holder for Systainer T-Loc I-V (Tanos, Festool, Berner, Metabo and Co.)

Here my Spirit Level Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Spirit Level ;) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…

Order a print of this model

Printables

Festool Track Saw Guide Rail Protection

This end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports. Update 20230623: Small modification on the splinter guard side (removed…

Order a print of this model

Printables

Festool knob M6

Ein Ersatzteil für die Festool Oberfräsen aber auch für jede andere Oberfräse. Benötigt wird eine M6 x 10 Sechskantschraube. Beide Seiten werden mit UHU Allplast verklebt. Siehe Bilder A spare part for the Festool routers but also for any…

Order a print of this model

Printables

Festool Vacuum to 50 mm adaptor

Please be aware that the 50 mm pipe has a slightly conical shape from 49.9 to 50.1 mm to make sure that it fits and is airtight. There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s approx. 4 h. If you…

Order a print of this model

Printables

Festool vacuum to Bosch GTS 635-216 adaptor

There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…

Order a print of this model

Printables

FESTOOL Original Splinter guard SP-TS 55 R + Custom versions

Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…

Order a print of this model

Printables

Dust extraction hood for Festool OF 1000/Spanfänger für Festool OF 1000

Inspired by the original Festool jig. Unfortunately, the tool is not available for the Festo OF 1000, so I redesigned it. If the cap is difficult to turn, a drop of oil helps. Inspiriert von der originalen Festool-Vorrichtung. Leider ist…

Order a print of this model

Printables

Festool Sortainer Labels

Labels to fit the drawers of Festool Sortainers. Verified to fit Sys 3-Sort 4 and should fit the drawers of any of the other Sys 3 Sortainers. The .f3d file allows you to easily change the text in Fusion 360. Simply open, edit sketch,…

Order a print of this model

Printables

MFT Clamp pad - (Festool - Veiko)

I design this pads to fit differrent brand of MFT / T slot clamp and to be printed without supports. It works on Festool, Veiko or no name from bangood The rectangular protective pads is inspired from the festool orginal pads The other…

Order a print of this model

Printables

Painters Cone for 19mm and 20mm workbench dog holes e.g. Festool MFT

I was always annoyed when my painting cones or pyramids moved away on the workbench when oiling or even polishing wooden boards … So I just thought about having a painters cone which uses my workbench dog holes, or which I can also screw…

Order a print of this model

Printables

Vacuum cleaner adapter cyclone, Makita, Festool, Bosch Kärcher

Various adapters for machine vacuum cleaner connection

Order a print of this model

Printables

Track saw parallel guide 16 mm (Makita, Festool, Bosch, Metabo...)

A fast and cheap parallel guide for 16 mm track saw or router rails. After aligning the guide rail clamp it and remove the parallel guides. Printing recommendations Filament: PETG or better Infill: 15% I've designed two different versions…

Order a print of this model

Printables

Festool TSC 55 and TS 75 Track Saw Locking Cover Plates

I made these to fit the TSC 55 and TS 75 track saws. The design is similar to one from a user Ladru on Thingiverse (https://www.thingiverse.com/ladru/designs). This has been updated to fit the TSC 55 and TS 75 nice and snug. I printed out…

Order a print of this model

Printables

Festool Organiser for Aegis CZ1000

Depending on accuracy of print , feet may require clearancing with rotary tool or engraver to fit over studs.

Order a print of this model

Printables

Tanos / Festool / Bott - Cover Mounting Pin SYS3 M / T-LOC

Pin montażowy osłony pokrywy systainera SYS3 / T-LOC firm Tanos / Festool / Bott. Najlepiej drukować na małej wysokości warstwy materiałem PCTG.

Order a print of this model

Printables

Tanos / Festool - Cover Mounting Pin SYS3 S / T-LOC SYS MINI TL

Pin montażowy osłony pokrywy systainera SYS3 S / T-LOC SYS MINI TL firm Tanos / Festool. Najlepiej drukować na małej wysokości warstwy materiałem PCTG.

Order a print of this model

Printables

Festool - Keychain

Model breloka na klucze z logiem firmy Festool. Zalecam drukować w dwóch kolorach.

Order a print of this model

Printables

Rotex 90 label for Festool systainer T-LOC SYS MINI 3 TL

Etykieta do systainerów T-LOC SYS MINI 3 TL firm Tanos / Festool dla papierów ściernych szlifierki Rotex RO 90. Sugeruję drukować w dwóch kolorach.

Order a print of this model

Printables

CXS 18 label for Festool systainer SYS3

Etykiety do systainerów SYS3 (oprócz M 112) firm Tanos / Festool z logiem lub tekstem CXS 18. Sugeruję drukować w dwóch kolorach. Montaż pokazany na ostatnim zdjęciu.

Order a print of this model

Printables

TS 55 / TSC 55 label for Festool systainer T-LOC / SYS3

Cześć Festool-maniacy! Tym razem udostępniam Wam etykiety dla naszej ulubionej zgłębiarki marki Festool! Do wyboru macie etykiety dla skrzynek drugiej lub trzeciej generacji. Zalecam drukować w PETG/ABS ponieważ PLA w rozgrzanym…

Order a print of this model

Printables

Tanos / Festool - Complete Systainer Insert for SYS3 S 76 / T-LOC SYS MINI 1 TL

Hello! I present a complete insert for the SYS3 S 76 (577808) and T-LOC SYS MINI 1 TL (499622) from Tanos / Festool systainers Consists of: - containers, - cover covers, - mounting pins. Various container variants available. I recommend…

Order a print of this model

Printables

Festool MFT/3 Protector

Festool MFT/3 protector made to protect the table rails while storing it vertically. It serves as a stabilizer for vertical storage as well as a protector for the side channels/rails. You would need minimum 2pcs. per table for the…

Order a print of this model

Printables

Festool Systainer Side Vent

Side vent for Festool Sys3 systainer (wall thickness 2.3mm). Designed for 95mm hole saw. Mounted using 6pcs m3x8mm bolts and m3 nuts. Onshape document:…

Order a print of this model

Printables

20 mm Mounting Studs for Festool Type Multi-Function Table

I recently modified a rolling tool cart into a multi-function workbench by machining a pattern of 20mm holes on the typical 96 mm spacing. I wanted to mount a small vice for light duty work. I therefore designed a set of tapered wedging…

Order a print of this model

Printables

Festool Clip On Wall držák trubek

Festool Clip on Wall Infill: 70% supports: no

Order a print of this model

Printables

DW 32mm to FESTOOL D27

Simple adapter allowing a D27 FESTOOL hose to connect to DW 32mm taper fittings such as the plunge router base. Maybe.

Order a print of this model

Printables

Festool MFT Hook and Bucket

A few simple accessories to organize fastfix cables, hearing protections, screws etc. so they're quickly available when needed. The bucket is separate from the closed hooks so it can be scaled at will and printed without supports with the…

Order a print of this model

Printables

Festool Systainer Sys3 mit Deckelfach - Hakendreher Einsatz

Hakendreher Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Ich wollte den Hakendreher von Festool unbedingt im Deckel haben: Damit der in den Deckel passt, muss er leider mit einem Winkelschleifer oben/unten etwas…

Order a print of this model

Printables

Festool Systainer Sys3 mit Deckelfach - Kegelsenker Einsatz

Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA

Order a print of this model

Printables

Festool Systainer Sys3 mit Deckelfach - Tiefenstop Einsatz

Tiefenstop Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Der Inbusschlüssel wird von unten mit einem Magnet gehalten. Tiefenstop→Wolfcraft Filament: Verbatim grau PLA

Order a print of this model

Printables

Festool Battery holder 12V

Festool battery holder 12V - simplify your tool management Tired of searching for your power tool battery? Mount your battery on the wall for quick access, while organising them according to their charge status. Make your everyday work…

Order a print of this model