1 / 3
RatRig V-Core 3.1 Enclosure Sealers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to fully seal a V-Core 3.1 with Enclosure 2.0 between the frame and panels
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 50
- Makes
- 0
- Views
- 623
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I made these brackets because I noticed a gap between my V-Core frame and the installed panels. The included 3mf file has 1 of each type to seal the top corners of the enclosure. You need 3 of each. You'll need 2 M5 or M6 screws (6 or 8mm length should work) and 2 t-slot nuts per bracket.
The 2nd picture is without where you can see the gap, the 3rd (and 1st) picture is with the sealers installed.
Happy printing!