Counting matching models…
Simple model that will adapt the tip of this vacuum pump (https://www.aliexpress.com/item/1005007227091602.html) to the canning-vacuum hose of a OBH Nordica Supreme Food Sealer (probably will work with any vacuum sealer with similar hose…
This is a replacement part for the VacMaster Pro 350 vacuum sealer, the little thing mounted to the lid that triggers the interlock switch when the lid closes (there appears to be no official name for that thing, nor anywhere to purchase…
Replacement Clip for HarvestRight Mylar Bag Sealer used to hold the bar closed for storage.
an aid to keep large silicone ziplock bags closed. has 3 adjustable cam locks. the cam piece and threaded are 1 piece for ready printing as one printable piece. you need 3 of the complete cam locks, as well as the nuts. no supports needed
Details: Make using your impulse heat sealer less of a chore with this table. Designed for an 8" impulse sealer with a cutter (4" tall) or a sealer without a cutter (3.25") Four 8mm magnets keep the table securely attached to the impulse…
This piece for the OBH Nordica Fresh n easy vacuum food sealer broke so I made a new one. This a bit sturdier than the original part so I hope it'll hold up better.
FoodSaver V1100 Cordless Handheld Food Vacuum Sealer - Cup
It is used to be sure, that no one had access to storage or room. This model needs a plasticine as a filler.
It is used to be sure, that no one had access to storage or room. This model needs a plasticine as a filler.
Achieve better & more airtight seals to store your dried filament with this simple spacer. Maintain suction even after the bag has been pulled tightly into and around the spool.
The 0.25 and 0.5-mL were developed to seal French straws for cryopreservation. The Fusion 360 files can be found on our GitHub through the following link: https://github.com/aggrc/French-Straw-Sealers Developed by the Aquatic Germplasm…
I wanted a chip bag slide-on sealer that is easy to print and adhered to the print bed. I didn't want a circular shape because of the poor print quality at the top of the curvature. The total length is 293 mm.
Print settings as original model: 0.4 nozzle 0.2 layer height 5 perimeters 30% infill No supports needed
Did you know regular filament spools fit in the large Ikea freezer bags (called ISTAD)? Even better, they fit in both the 4.5L and 6L bags! 30 bags for a couple of bucks. But getting the air out is annoying. How? Seal from one end with…
helps close ziplock bags i improved the design of one that came with my vacuum pump for food bags. i chamfered the edges to make it easier to get the bag inserted has pattern to help keep fingers grip the sealer has lanyard hole best to…
Simple model that will adapt the tip of this vacuum pump (https://www.aliexpress.com/item/1005007227091602.html) to the canning-vacuum hose of a OBH Nordica Supreme Food Sealer (probably will work with any vacuum sealer with similar hose…
I used and recommend something stronger like petg or ABS. I printed with 85% infill and no support material.
As stated in the header.. it's a bag sealer with snap-fit. Best used for keeping your hard drives fresh. Included sizes 50, 100, 150, 200 and 250mm Print instructions 100% infill is recommended
A twist in clip designed to close the gap on the side of the V0 Stock panels, as well as keep the tophat securely locked. Uses the following twist in keys:…
I've always found that the top of my V-Core 3.1 door doesn't sit against the frame, which sucks if you are trying to heat it. So, these sealers attempt to address that. This is designed to solve the issue by providing a place for the door…
cleaned up to seal just the back corner, uses the same micron clips linked in the original model
The Anova Vacuum Chamber/Sealer uses a deep chamber to compensate for its compact size (relative to more traditional chambers). The deep chamber lets larger bags be folded over so that the open end doesn't extend past the sealer bar.…
I had to refurb my HDEV 5.2 injectors and I didnt want to spend money on a tool thal ill use only once so i made these to help resize the seals after i got them over the nozzles and into the grooves. Sizes range from 7.7 to 8 mm in…
Meet Your New Favorite Kitchen Gadget! Tired of wrestling with those annoying bag clips that never quite seal properly? Fed up with folding bags just right, only to have everything spill out anyway? We've got the solution you've been…
I lost one of the rubber feets and create a spare one. TPU Flex.
The cover and cable gland were printed from ABS-cf, the seal from TPU
Make sealing your filament storage bags a breeze! This custom-designed adapter allows you to quickly and securely use your small, wireless table vacuum (like the model pictured) to remove air from your Creality filament bags. Say goodbye…
This is an applicator tip that you can use with 3M's Loctite Silicone Sealer tubes. I was using it as a replacement for the included tip, and to get a nice small bead for some crafts projects. You can increase the bead size by cutting off…
This is a replacement part for the VacMaster Pro 350 vacuum sealer, the little thing mounted to the lid that triggers the interlock switch when the lid closes (there appears to be no official name for that thing, nor anywhere to purchase…
Best way to say thanks? Post a make. 3M 200ml Pneumatic Dispenser Hose Retainer (Panel Bond / Seam Sealer) This is a mounting retainer accessory for the 3M 200ml pneumatic dispenser gun used with panel bond adhesive, seam sealer, epoxy,…
Eadubs great model was oh so close, but not the right geometry for my impulse heat sealer. I used tinkercad to make my modifications and I am not yet up to speed with a CAD program to use the STEP file yet. - 3-3/8th inch tall (86 mm) -…
Replacement Clip for HarvestRight Mylar Bag Sealer used to hold the bar closed for storage.
Tired of wasting time and hurting your fingers trying to seal those double-ziplock filament bags? Pressing the seal manually along the entire length takes forever and often isn't even sealed properly, letting moisture in. This Fast…
Keep your snacks fresh with CROCK, a fun crocodile-inspired bag clip designed to securely seal opened bags and help prevent them from reopening. The spring-loaded jaw clamps tightly onto folded packaging, while the lightweight 3D-printed…
A lifesaver for your kitchen! This practical bag clip is designed to securely seal your opened packages. Simply fold over your bags of chips, coffee, pasta, or frozen foods and slide this clip on. Its specialized inner geometry grips the…
this is a bag sealer that slides along the folded end of the bag. this is for silicone ziplock bags, regular ziplock bags, regular food bags (chips etc.). i use an extended ring on the beginning to add stiffness to prevent opening…
Print Settings: 4 to 5 Walls 4 Top 4 Bottom 25 % infill There is two sizes for the plastic bag sealer. The big one is 88mm diameter cap and the small one 43mm diameter cap. I add a lid with thicker walls for those people with problem to…
Tired of all those fiddly hinged bag clips that just bend and break? Then this is for you, a sturdy bag seal with screws. Included sizes(bag sealing length): 50mm, 100mm, 150mm, 200mm and 250mm.
I designed a replacement sealing clip for the eSun vacuum bags just in case I lose the two that come with it. These might work with other vacuum bags as well but I haven't tested that so feel free to let me know what its compatible with…
Not sure if it was just the cleaners I was using on my counter, but the feet of my sealer would smear rubber wherever it was used. Hello, 3d printer. This is a set of replacement feet for just about any Impulse Sealer on the market. It…
This is a replacement part for the removable section of the vacuum sealer kitchen tool. The original part can easily breaks at the hinges with frequent use. This design thickens the fragile hinges as well as splits the part into 3…
Vacuum Seal Your Wine I learned about the Vacu Vin® wine saver while working at a winery. We would pump the air out of our unfinished wine bottles every night in the tasting room so the wine wouldn't oxidize. In the presence of oxygen,…
Made a bracket to seal the hole behind the screen. It requires 1mm thick foam tape. Can be 7 or 8mm wide. Easy to install and remove if not printing with filaments that require hot chamber temps. 1mm thick foam tape. Supports needed.…
Some wood stumps feel out of the filament tube below the roof of my Prusa lack setup, so I took the original tube reversed it and made it in a way that you can just push it in below the filament guide into the enclosure. No glue required,…
An amazing vacuum hose nozzle to get most of the air out of simple seal bags. The head has multiple holes; so if one hole gets covered, there are plenty left. Fits the Bissell Featherweight Vacuum.
Background story In my old thermos the cap's sealer broke into three pieces: So I reverse engineered the cap's sealer in FreeCad. The initial MK1 model has been designed exactly as the original sealer, but it was not rigid enough at the…
Details: Make using your impulse heat sealer less of a chore with this table. Designed for an 8" impulse sealer with a cutter (4" tall) or a sealer without a cutter (3.25") Four 8mm magnets keep the table securely attached to the impulse…
I made these brackets because I noticed a gap between my V-Core frame and the installed panels. The included 3mf file has 1 of each type to seal the top corners of the enclosure. You need 3 of each. You'll need 2 M5 or M6 screws (6 or 8mm…
I purchased a few cans of car underbody sealer however they had pull ring to open them but no way to seal them again (no cap/lid). This is a simple cap for sealing those cans - the ones that a Schutz gun screws into when spraying bitumen…
I made this model because I hate it when chips lose taste after they have been opened for a long time 😂.
Time to head out to the country house, needed to bring some already opened packages of milk and yogurt. Designed a thingy that seals up the package. Should work for all kinds of packages.
I've modeled this with a bunch of variables so that you can tweak it to fit your pump. As currently set, it fits a bit loose, so I would make it tighter if your pump doesn't have the same lip as mine.…
I printed with a 0.4 nozzle, 0.2 layer height, 5 perimeters and 30% infill. No supports needed.
Knocked my impulse sealer off my table and cracked the knob (part you use to press down) so I modeled this one up. It uses an M5 heat set insert in the bottom then I used an M5 20 (does not need to be that long but it's what I had) up…
Tapa de sellado de la puerta de la Creality K1 Max Sealing cover of the door of the Creality K1 Max
This is a modified breechface for the Wildstyle by Sillybutts, that uses a printable TPU gasket instead of a glued o-ring since i didn't want to mess with glue. Printing instructions Print the PTseal as per Sillybutts' instructions, for…
This is a 3D-model replacement gear for the Zepter VacSy vacuum sealer. The original gear wore out, and finding a replacement part was a challenge, so I decided to model and print a new one. The gear is printed in PETG, offering a good…
