1 / 1
AZDelivery ESP32 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two piece version of a case for the AZDelivery ESP32 Board
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 70
- Makes
- 1
- Views
- 1,054
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
A simple two-piece case for the AZDelivery ESP32 board.
Additional material needed:
- 4 M3x10 cylinder head screws
- 4 M3x4 cylinder head screws
- 8 M3 nuts
The board is screwed onto the bottom part using the M3x4 screws and 4 nuts. After that, the top part is screwed to the bottom part using the M3x10 screws and the 4 remaining nuts.
There are two versions of the top part, one leaving some space in the venting grills for a temperature sensor.