1 / 1
HSW Mounting Grid for 0.1" Spaced PCBs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Neat way of mounting 0.1" pitch electronics to a honeycomb storage wall
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
No supports required. If you need a grid of a different size, you can get it from Darren's fusion 360 model, then it's just a case of adding a honeycomb piece to the back.
Rather than use standoffs I've had success using 16mm M3 bolts, which have enough friction to attach to the grid. For spacing I added a nut between the pcb and the grid.