1 / 4
Deathly Hallows Project Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Harry Potter themed enclosure for a Raspberry Pi Pico soldered on a 50x70mm perfboard
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I designed this as an enclosure for the electronics for a Harry Potter themed book nook. The case is made to contain a Raspberry Pi Pico soldered onto a 50x70mm perfboard.
The case has cutouts for the Pico's micro USB slot as well as one for the any other data wires that may be necessary for the project.
The perfboard can be mounted to the bottom half of the case with m2 screws and the two pieces should snap securely together.
No supports should be necessary.