Basket for Skadis

Here are a couple of  Voronoi-patterned baskets that can be mounted on the IKEA Skådis board using T-nuts. The baskets are available in two sizes 80 x 50 mm and 120 x 40 mm.

Installation

The baskets is mounted on the Skadis board using a T-nut that is made to fit M3 screws. T-nuts ensure a strong and secure hold and are easy to install and remove by using a screwdriver. The baskets are available in two different versions, one with countersunk holes and the other with flat holes, depending on the type of screws you use.  The screws that you will need to use should be about 14-16 mm in length.

Place the screw in the T-nut through the holes in the basket and screw it in until the T-nut is about 2-3 mm from the back of the basket, insert the T-nuts vertically through the Skadis holes, then as you tighten the screw the T-nut will turn and lock the basket to the board.

You can find and download the matching T-nut here:  Skadis T-nut for M3 screw.  

Printing and print settings

In the model files, the parts are orientated in the direction best suited for printing. Use PLA for printing with a layer height of 0.2mm and a nozzle width of 0.4mm. A wall, bottom and top thickness of at least 3 lines and an infill of 25%. A support structure is unavoidable.

More of my models

You might be interested in some of my other models.

Skadis hook set 

Click here if you are interested in seeing all of my models for IKEA Skådis board.

Feedback is always a good thing.  To encourage me or other designers to make more models, hit like and/or post your makes. If something doesn't work or is missing and can be improved, please leave a comment.