Vacuum Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.37 net (excluding VAT)
For file: HoseToMini_0.4n_0.2mm_PLA_MK4IS_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 26.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Vacuum adapters and attachments for the Milwaukee M18 2 gallon wet/dry vacuum
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 281
- Makes
- 1
- Views
- 2,320
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
These are attachments and adapters for the Milwaukee M18 2 gallon wet/dry vacuum, model 0880-20. You can use the hose on it's own or with the printed micro crevice tool accessory. It is compatible with the commonly available micro vacuum attachments. There is also an adapter for removing the air from filament bags. For the hose adapter there is a version with a hole and one without, I recommend printing the one with the hole. To use it turn the adapter on the hose so that you have an appropriate amount of suction. It will be easier to see what I mean when you use it.
The hose is 3/8" inside diameter.
I will add more tools later.