1 / 2
Tevo Little Monster part cooling duct — image 1
1 / 2

Tevo Little Monster part cooling duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A part cooling duct for the Little Monster that is light weight, fast to print, and works!

Rating
0 / 5
Likes
3
Downloads
48
Makes
0
Views
227
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Add this fan duct for better cooling of your prints.  Two are required per printer.

Best printed with a 0.4mm nozzle or smaller.  I'd suggest adding a brim as well as supports to get the best result.  Even with the brim and supports they're very fast to print.

Probably best to print in ABS or high temperature material.  Having said that I printed them in PLA and they're working fine, though I only ever print PLA on that printer.

For mounting, the duct slots in under the fan mounting screws.  If you have the original Little Monster fans the fit should be very good.  I have after market fans from Triangle Labs and these fans have slightly thicker tabs.  The fit is not quite as good with these fans, but I think still acceptable.  Refer photo.

Tags