Forest Shuffle (Mischwald) Insert
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.52 – €10.41 net (excluding VAT)
For file: MK4S with Prusa Woodfillament / insert-v2_04n_02mm_Prusa_Woodfill_mk4s_6h51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.46 excluding VAT (range midpoint).
- Weight reported by the author
- 173 g
- Print time reported by the author
- 6.85 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easily store all your forest shuffle materials with this insert. One big card deck separated from the special cards.
- Rating
- 4.6 / 5
- Likes
- 15
- Downloads
- 191
- Makes
- 5
- Views
- 2,301
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024-12-22: Added a new version with more space for extensions and wider space for sleeved cards.
I didn't like that the cards had to be divided into three stacks. So I built this insert where you can store the normal deck cards in one compartment and the other cards (winter cards, caves and reference cards) separately. This way you can start a new game night more easily.
I added some extra space for the cards so sleeves could work, but not tested! Please let me know in the comments if you tried :)
Needed build volume: 218mm x 158mm x 49mm
Recommended print settings:
- 0.4 nozzle
- 0.2 layer height
- 2 walls
- Bridge direction: 45° (important)
- No supports needed
- No infill needed
This will need about 179g filament and willl take 4h12min on a Bambu Lab printer.
I would be happy to see your prints in the Makes section!