Elegoo Saturn 2 Magnetic Exhaust Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An exhaust port adapter for the Elegoo Saturn 2 that pairs with the CREALITY K1 100MM/4" DUCT FUNNEL
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 0
- Views
- 575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is an exhaust adapter for the Elegoo Saturn 2 resin printer. The adapter is made to work with the 4" exhaust funnel made for the Creality K1 that can be found here: https://cults3d.com/en/3d-model/tool/creality-k1-100mm-4-duct-adapter-and-duct-funnel
I printed this set for my Creality K1 to exhaust the fumes outside from my high-temp prints. I was recently gifted the Elegoo Saturn 2 and I wanted to exhaust the resin fumes in the same manner, so I designed this adapter to work with what I already had.
The adapter is made to accept 2mm X 8mm magnets but lines up with the magnets on the funnel for a great fit. You can use the hex screws that hold the exhaust plate in place to mount this adapter securely.
I printed the adapter with regular PLA, with supports only for the magnet holes, though you can probably get away without using any supports. 20% infill should be plenty for this with 0.2mm for the layer height.
I also created a simple magnetic cap for the adapter as well. I made this so that I could disconnect the exhaust hose and seal off the printer to prevent fumes from escaping.