1:40 worm gear gearbox for nema motors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a 1:40 gearbox for nema 17 motors, requires 3 608 bearings, and a m4 hex wrench
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 179
- Makes
- 0
- Views
- 1,359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
If you are using a different type of bearing, you can change the bearings' dimensions in the FreeCAD file's dimensions spreadsheet, as well as other dimensions of the model.
Warning: changing the hex size won't update the holes in the gears.
The best material to use is PETG, and you should use a lubricant. But be worry, the tolerances are tuned for my filament, yours could shrink less or more
If you have a well calibrated and well cooled printer, then supports are not needed. But if you have a stock ender 3 type printer, then they are recommended.
You should glue in the bearing inserts.
