1 / 5
1:40 worm gear gearbox for nema motors — zdjęcie 1
1 / 5

1:40 worm gear gearbox for nema motors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a 1:40 gearbox for nema 17 motors, requires 3 608 bearings, and a m4 hex wrench

Ocena
0 / 5
Polubienia
14
Pobrania
179
Wydruki
0
Wyświetlenia
1359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you are using a different type of bearing, you can change the bearings' dimensions in the FreeCAD file's dimensions spreadsheet, as well as other dimensions of the model.

Warning: changing the hex size won't update the holes in the gears.

The best material to use is PETG, and you should use a lubricant. But be worry, the tolerances are tuned for my filament, yours could shrink less or more

If you have a well calibrated and well cooled printer, then supports are not needed. But if you have a stock ender 3 type printer, then they are recommended.

You should glue in the bearing inserts.
 

Tagi