Base for Screw Fixing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw Fixing Base for Flexible Arm.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 52
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
The base is Made for vertical and horizontal positioning of the arm
I recommend to print in a high infill (at least 40%).
I made it with PLA+ 60% infilo and with an arm extended 40 cm (16 inches for American friends) and it can easily support 2kg at the end of the arm without any scratching.
For a better friction i use rubber gaskets beween every joint, no knurls
It has a low tolerance due to the fact that has to be really really tight in place.
By the way my 3d printer is very old and I have an increased flow (lightly), I had to sand (not more than 5 minutes in total) to make them perfectly fit.
I used diameter 4mm screws to fix it to the desktop. It is made for 4 screws but I used only 2 because it’s more than enough for me.