Door Strike Locator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The door strike locator is used to mark the door jamb for the hole for the latch and strike plate.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The door strike locator is used to mark the door jamb for the hole for the lock latch and strike plate. After several years of loyal service my locater walked off the job and I made this one to replace it.
The locator is sized for the 1" edge bore and works with any of the lock installation jigs using the 1" edge bore. It will work for both 2-3/8 inch and 2-¾ inch backsets. I used a roofing nail for the point and it is a friction fit so the point can be replaced as needed. The hole for the point is 19mm deep and 3.3mm diameter. You will need to adjust for whatever you use for your point.
Printer: Ender 3 S1 Pro
Infill: 10-15%
Filament: PLA/PETG. Uses 12g+/- depending upon your settings