43 models
Combo decoder for Schlage and Kwikset keys. Print in 0.2mm layer height so you get 2 layers on the letters on top. I've included a file that has the color change height already set, but it's at 2.0mm if you wanna do it yourself.
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
This is a customizable Schlage SC1 House key (5-pin) with label. Download the SCAD file and open it in OpenSCAD. On the right hand side click on parameters and enter in your key coding. I have also uploaded a full set of Depth Keys using…
fully printable bump key, print in 100%infill in low layer height for quality (0.08) PETG preferred can be used as is, but it will wear down with use fairly quick. best if copied (key cutting kiosks work) and made in brass
Updated 11/28/2020 added old style follower. Updated by request: 2/13/2020 increased diameter by 1mm I found out while re-keying a new Schlage lock today that it appears they have changed the cam on the end of the key way and the old…
I wanted to put a Schlage Encode plus on an outdoor gate, but that leaves the part intended to be inside out exposed to the elements. After many designs, I ended up with two pieces. That allows you to mount the back under the lock, then…
If you've ever rekeyed a Schlage lock you will have a pile of pins that are a pain to sort. I made this gauge to easily determine which pins correspond to which size.
It holds the spring loaded pin down and uses the rest of the indentations to spin the cap.
A way to set all nails in the game to be the same height. I used 4 inch nails. I would make it a bit chonky because of the hammering. I did 40% infill with 5 walls. We didnt have any issues with the nail holding the guide in.
This is a remix of a remix of a house key credit card by Regnad found here . He said he was workin on a Schlage version but I was impatient so I did it for him. You can print a key guide like this one or just use a micrometer like I did.…
Modified from Aqara’s official adapter STP files. Created 2 variants: A tiny insert that prints in 5 minutes that should fit into "Adapter 5" that comes in the box with the U200. The entire adapter where the interface point will work…
Remix of elliotboney's "Duplicating House Keys Credit Card (Schlage Remix)" with the following tweaks: Added score between key and card for cleaner break-off. Revised cut order to match factory code order (read bow to tip). Added option…
Couldn't find anything to fit my door knobs (schlage) nicely, so I made these two. One for the exterior door's knobs, and one for the bedroom door's knobs Category: Replacement Parts
Took the standard Schlage tool and lengthened it out a little for comfort and added a smaller slot in the middle that's just a little wider than the pin to make it easier to keep the pin centered and vertical over the hole in the bible.…
This is a removable lockout key for Schlage keyways. Please use it carefully and legally. Do not use it if you don't understand it. Use it only on locks you own
Kleine Box mit Plexiglas Scheibe (120mmx120mm) Mit Schriftzug Im Notfall Scheibe einschlagen. Kann mit Süßigkeiten oder anderen Gegenständen gefüllt werden (zum Beispiel für eine Pfeife um nach Hilfe zu Rufen). Beim Text sollte bei 1,8mm…
Gedruckt in TPU oder TPE mit 3 Seitenwänden und 0% Infill
Schlage Killer key, designed to lock out a schlage keyway lock. Printed in PLA, 15% infill, 3 walls,
5-pin bump key for Schlage SC1 lock cylinders, for locksport. Based on OpenSCAD code from https://www.thingiverse.com/thing:8925
Just a followup to an earlier design for those who need the old style follower.
6-pin bump key for Schlage SC4 lock cylinders, for locksport. Based on OpenSCAD code from https://www.thingiverse.com/thing:8925
14 point core cap removal tool. I went to repin a lock, and my cap removal tools did not fit. It turns out that some have 12 points, and the one I was working on had 14. The original model had the 14 points that I needed, but was not…
Key Silencer for Schlage home keys. Print requires a pause command to insert key mid print. 0.2 layer height recommended. Versions with and without the house icon.
My dog figured out that she could push open the closed door to the room with my printer. I discovered this was because the latch mechanism was sitting too deep into the frame. I found the helpful model "Door Bolt/Latch Shim" by Mizzzou…
I have door handles in my house, but I wanted to temporary convert some of them to door knobs so that I can put on a child safety locks like this one.…
This cover was designed to replace the battery section of a Schlage Camelot Deadbolt. It isn't a perfect match, but close enough to not stand out terribly. Category: Replacement Parts
This is a cap designed to make your key head longer, just enough to make it more comfortable to use or easier to use in a recessed guarded lock, without adding significant bulk to the key. My design criteria were to not make the key head…
I needed something to replace my door lever temporarily to install child safety locks. Converting to a knob was preferred over solutions for door levers that will likely damage my door's finish upon removal. Plan is to remove this after a…
This is an emergancy key replacement for a Schlage indicator deadbolt. Print it in a strong filament. It take only a few minutes to print so your child or coworker won't be locked in the toilet for long.
Entwickelt an erster Stelle für Menschen, denen das Greifen schwer fällt. Mit der Nagelhilfe kann der Nagel fest fixiert werden und somit wird das Einschlagen des Nagels erleichtert und die Gefahr der Verletzung sinkt. Nicht vergessen:…
This tube is used to hold the springs in place so you can rekey a Schlege F series lock. This is a good video on the process:
Fits what I think is a Schlage ALX Series - Saturn Entrance lock. Designed to prevent people from turning the lock button and locking people out of rooms or spaces where the passageway lock was improperly used. (Since no matter how many…
Print in durable material. PLA not recommended - this part replaces the metal / brass spindle driver in a Schlage door handle / lockset inside the lock assembly that wears out and cracks apart from stress.
I'm getting a deck on my house replaced later this week, and I don't want anyone to accidentally walk out the door when there's no deck there, so I designed and printed this little thing to keep the deadbolt in a locked position. If your…
The Schlage lock that I have has little inserts to cover the screws. One kept on falling out and finally got lost. I created this to replace it.
I had a door where the gap between the entry handle latch and the door jamb was just slightly too big to keep the door properly latched when closed. This shim sits behind the strike plate, virtually invisible, to move the strike plate 2mm…
Lagerbuchse für Vorderrad eines z.B. MDT Aufsitz Rasenmähers. Jedes Vorderrad benötigt davon 2 Stück. Die Buchse wird auf die Achse gesteckt, auf die Buchse wird das Vorderrad gesteckt. Die Abmessungen entsprechen dem Teil MDT 741-0487…
These print files do not come with a warranty. They are not meant to be permanent solutions for a broken door latch, as 3D prints can be brittle and unstable, especially in an environment like this. Please properly replace the parts in…
The Schlage Connect BE469ZP smart lock includes a deadbolt that supports 1-3/8" and 2-3/4" sizes. If you have a 3-7/8" deadbolt on your door, you are out of luck: this lock will not fit your door, and it's impossible to find a deadbolt…
Lock Format: you need to have a Schlage KIK format ASSA Twin 6K for this tool to work. Print Settings: due to the fine object geometry and minimal margin for error, I strongly recommend tuning your printer's nozzle-temperature /…
A lever handle for a Schlage-style house key. The key's head is glued into a slot at the bottom of the handle, and the handle steps up and out to one side, so you turn the key with a lever about 82 mm long instead of pinching its head.…
This is a removable lockout key for Schlage keyways. Please use it carefully and legally. Do not use it if you don't understand it. Use it only on locks you own
These print files do not come with a warranty. They are not meant to be permanent solutions for a broken door latch, as 3D prints can be brittle and unstable, especially in an environment like this. Please properly replace the parts in…
