Magnet Holder for Airbrush / Magnethalter zum Airbrushen
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.90 – €1.10 net (excluding VAT)
For file: magnethalter_0.6n_0.25mm_PETG_MINIIS_42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 42.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holds your paper on a magnetic surface and is easy to remove. / Macht die kleinen Magneten benutzbar.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought some small magnets (ø 10 mm, 2 mm height) to secure my airbrush stencils but found that these are so small that my fat fingers can't lift them up with ease. So I made these holders for them and now they are very usable. The magnetic force is not so strong anymore and with the handle they could be easily repositioned or removed.
They are still small so they fit also into smaller areas without hindering you.
Printing Instructions:
Use the included .3mf for printing or make a stop at 2.75 mm height to insert the magnets.
––––––––––––––––––––––––––––––––––––
Ich habe mir ein paar Neodym Magnete (ø 10 mm, 2 mm hoch) gekauft, um meine Airbrush Vorlagen/Schablonen fest zu halten. Leider sind die Dinger so klein und kräftig, dass ich sie kaum wieder runter bekommen habe. Also habe ich fix diese Halter entwickelt und gedruckt. Durch die 2 Lagen Plastik am Boden sind sie nicht mehr ganz so kräftig aber immer noch ausreichend. Mit dem Griff lassen sie sich leicht verschieben oder entfernen.
Meiner Meinung nach sehr nützlich und weiter so klein, dass sie einen nicht behindern.
Zum Drucken entweder die beiliegende .3mf Datei verwenden oder im Slicer bei 2.75 mm Höhe eine Pause einfügen um die Magnete einzulegen.