1 / 1
CR 1/3N or DL 1/3N 3V 3.7V battery case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small case to hold up to 4 CR 1/3N or DL 1/3N batteries.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 50
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed to fit the seldom used CR 1/3N battery type, which should be very close to the DL 1/3N battery type as well. Voltages of those batteries should be around 3v but some go up to 3.7v. This will easily hold a single battery or it can hold up to 4 batteries within the handy carrying case.
Printer: Bambu Labs X1 Carbon
Filament: PLA or PETG will work fine.
Layer Height: 0.2mm
Wall Loops: 4
Top Layers: 4
Bottom Layers: 4
Sparse fill: 15%
Sparse pattern: gyroid