1 / 3
Reservoir to toilet connection V2 — image 1
1 / 3

Reservoir to toilet connection V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connect reservoir with the toilet - V2

Rating
0 / 5
Likes
0
Downloads
17
Makes
0
Views
95
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

Connect reservoir with the toilet. 

Print straight pipe as many times as needed (I need three).

For every straight pipe and elbow you need one sealing (six in my case). 

Insert sealing (see picture):


Then insert pipe or elbow (use lubricant for easier insertion):


 

  • Pipes and elbows - PETG (C-Tech Premium Line)
    • nozzle - 0.4 mm
    • layer - 0.2 mm
    • infill - 25%  
    • perimeters - 4
    • bottom layers - 4
    • top layers - 5
    • Top end pipe:  
      • brim - yes
      • supports - no,
    • Straight pipes and elbows: 
      • brim - no
      • supports - yes (organic)

 

  • Sealing and Sealing_top: FLEX (Filament PM TPE88 RubberJet)
    • nozzle - 0.4 mm
    • layer - 0.2 mm
    • infill - 0%
    • perimeters - 4
    • bottom layers - 4
    • top layers - 5
    • brim - no
    • supports - no

 

  • Sealing_bottom: FLEX (Filament PM TPE88 RubberJet)
    • nozzle - 0.4 mm
    • layer - 0.2 mm
    • infill - 10%, grid
    • perimeters - 3
    • bottom layers - 3
    • top layers - 4
    • brim - no
    • supports - no

Tags