LCD Display Mount for Creality CR-10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This display mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the usual…
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 423
- Makes
- 2
- Views
- 1,637
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This display mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the usual 12864-type LCD, if you want to convert the classic CR-10 into a boxless version.
Parts needed:
- 4x M3x10 hex socket screw
- 4x M3 T-Slot nut for 2020 extrusion profiles
- 4x M3x8 hex socket screw (you can use the original mounting screws)
- 4x M3x4x5 threaded inserts (use of a soldering iron required)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
15%
Filament:
Generic PETG
Notes:
A brim might help with adhesion/warping.
Post-Printing
Threaded inserts
Use a soldering iron (~200 °C) to press the threaded inserts into the back of the mount.
Assembly
It is recommended to mount the holder first to the extrusion profiles in the front of the CR-10 and add the display afterwards (the screws are much easier to reach this way).