LCD Display Mount for Creality CR-10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This display mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the usual…
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 423
- Wydruki
- 2
- Wyświetlenia
- 1637
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This display mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the usual 12864-type LCD, if you want to convert the classic CR-10 into a boxless version.
Parts needed:
- 4x M3x10 hex socket screw
- 4x M3 T-Slot nut for 2020 extrusion profiles
- 4x M3x8 hex socket screw (you can use the original mounting screws)
- 4x M3x4x5 threaded inserts (use of a soldering iron required)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.3 mm
Infill:
15%
Filament:
Generic PETG
Notes:
A brim might help with adhesion/warping.
Post-Printing
Threaded inserts
Use a soldering iron (~200 °C) to press the threaded inserts into the back of the mount.
Assembly
It is recommended to mount the holder first to the extrusion profiles in the front of the CR-10 and add the display afterwards (the screws are much easier to reach this way).