1 / 5
LED separators
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small holders to keep LED legs separated to stop short circuits. Fits crocodile clips.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Various designs of LED holder, to keep LED legs and crocodile clips separated when making circuits.
The tube design makes a good insulated connection, the open base design is less fiddly, so easier for children to use.
To print:
- Flip all of the files upside down for best results.
- They are tiny, so check your bed adhesion / add a brim if needed.
- I printed in PLA, 0.2mm layer height, 15% infill - it probably doesn't matter too much what settings you use.
Files included:
- With tubes
- 1x LED
- 2x LED with shared ground in a row
- 2x LED with (optional) shared ground in a column
- Open base
- 1x LED
- 2x LED with shared ground in a row
- 2x LED with (optional) shared ground in a column
Improvements to be worked on at some point…
- Flip the parts, so I don't need to manually do it in the slicer.
- The +/- signs don't show up very well. I would like it to be visible at 0.2mm layer height to save on printing time as I print lots at once for educational use.
- The shared ground on the tubed column design isn't as secure as the others - the LED wires could be guided at an angle.