Magnifying Glass Hoop
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.23 net (excluding VAT)
For file: Magnifying Glass Hoop V01_0.4n_0.2mm_PLA_MK4IS_11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 11.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A hoop or insert that improves the fit of the lens.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
The lens of my magnifying glass has been falling out for a long time. It's time to fix it.
Print instructions:
- Material: PLA, transparent recommend
- Filament: Filamenr PM PLA - Transparent
- Layer: 0,2 mm
- Perimeters: 1-2
- Supports: No
- Brim: No
This model does not require any special settings, more details in the attached 3MF file.
Assembly instructions:
Please carefully disassemble the magnifying glass. I recommend putting a piece of cloth on your work table for safety reasons.
Insert the lens into the printed insert and fold the magnifier in the opposite way.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.