1 / 8
ESPink Shelf Snap-Fit Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For ESPink-Shelf-2.13 ESP32 e-Paper board, battery and sensor.
- Rating
- 4.75 / 5
- Likes
- 30
- Downloads
- 219
- Makes
- 5
- Views
- 1,556
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Snap-Fit box for ESPink Shelf Box/Case with battery and temperature or CO2 sensor (optional). No glue or screws needed.
There are 2 main versions of the box:
- Original Box with more inside space
- Box with centered display
Each box has two variants:
- for 6mm thick or less battery (e.g. 1500 mAh)
- for 10mm thick battery (e.g. 2500 mAh)
And you can combine the box with various lids:
| Lid | For Original Box or Box with centered display |
|---|---|
| Solid - without holes | Solid |
| With only Reset Hole | R |
| With only Switch Hole | S |
| With only Grill Vent | G |
| With Reset + Switch Hole | RS |
| With Grill Vent + Reset Hole | GR |
| With Grill Vent + Switch Hole | GS |
| With Reset + Grill Vent + Switch Hole | RGS |
Recommended print with 0.4 nozzle and 0.2 layer height. No support.
You can buy the board here: LaskaKit ESPink-Shelf-2.13 ESP32 e-Paper