Bearing Spool Holder for CR-10 or Ender 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No need to add support on main part. Confirmed fit with CR-10V3 and Ender 3 pro
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 143
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
It's a spool holder that spool touches the clean metal surface of the bearings for low friction smoother spinning. I've tried several other spool holder models but every models are cylindrical design and it requires to add some support or bridging. I want to print with runny PETG so I didn't like that. I designed every overhang angles same or less than 45 degree so you don't need to put any support on my model (except the thread of part B)
Fits CR-10 and Ender 3. I own CR-10V3 and Ender 3 PRO and it worked great with both models. Fits 1kg spools. Fits any filament spools with up to 90mm width and at least 45mm inner cylinder circle diameter or 52mm if you need to use Part D.
Materials
3 x 608 bearings
https://www.amazon.com/SHKI/dp/B09PKD8QZZ/ref=zg_bs_g_16411051_d_sccl_1/144-0934921-3722537?th=1
1 x Genuine spool holder lock nut
If you don't have it or lost it, Mr./Ms. @Joe_224841 is providing a STL below.
https://www.printables.com/model/314781-very-low-friction-spool-holder-for-creality-ender-/files
1 x Part A
1 x Part B
3 x Part C
1 x Part D (optional)
How to print
You need to print 1xPart A, 1xPart B, and 3xPart C. If your spool is made of wood and center of the spool is not cylinder shape, you need Part D as well.
You only need to put support between the thread of Part B. Thread works without the support but its a little flimsy. Other than that, you DON'T NEED SUPPORT on Part A, C, D.
I printed with PETG without any shrinkage compensation (100%) I've printed many times with my PETG filament to find the best fit dimensions.
Don't “align” seam position on Part C and Part D since those are cylindrical model. Use “Random”
I printed with PETG 15% Adaptive Cubic infill, 3 walls, layer height 0.2mm, width 0.4mm and its working no problem.