1 / 6
CAMLOCK adapter for flexible vacuum hose
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a CAMLOCK adapter for a 40mm flexible vacuum hose
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 43
- Makes
- 0
- Views
- 384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found a nice flexible suction for a stand drill from @teslapunk HERE. However, I was missing the counterpart to connect to the CAMLOCK adapter from @PeterH HERE.
I therefore modeled an adapter between the flexible vacuum cleaner hose and the CAMLOCK connection end.
At the same time, I needed to attach the adapter next to the stand drill. Therefore, I also drew the adapter holder. To assemble it, you need 4 pcs M4 x 45mm screws and 4 pcs M4 nuts, for which there is room in the holder. I attached the holder itself to the table with 2 screws 3.5 x 35 mm.