1 / 6
CAMLOCK adapter for flexible vacuum hose — zdjęcie 1
1 / 6

CAMLOCK adapter for flexible vacuum hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a CAMLOCK adapter for a 40mm flexible vacuum hose

Ocena
0 / 5
Polubienia
16
Pobrania
43
Wydruki
0
Wyświetlenia
384
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I found a nice flexible suction for a stand drill from @teslapunk HERE. However, I was missing the counterpart to connect to the CAMLOCK adapter from @PeterH HERE.

I therefore modeled an adapter between the flexible vacuum cleaner hose and the CAMLOCK connection end.

At the same time, I needed to attach the adapter next to the stand drill. Therefore, I also drew the adapter holder. To assemble it, you need 4 pcs M4 x 45mm screws and 4 pcs M4 nuts, for which there is room in the holder. I attached the holder itself to the table with 2 screws 3.5 x 35 mm.

Tagi